Products purpose
Sante dual zonesTube furnaces are applied to Colleges, Universities and Research institutions, process the sintering of cermet material and ceramic material, heat treatment of some monocrystal, refractory material reheat shrinkage researching under high temperature, and used for small batch production.
Main features:
1. Furnace chamber material use imported high purity Al2O3 ceramic fiber materials, no powder pull off under high temperature, small heat capacity, and energy saving more than 50%.
2. Heavy duty double layer structure. Lower teperature in outside case.
3. Microcomputer PID control module, enabling precise temperature control and constant temperature requirements
4. Temperature control with 2groups/16 segments programmable.
5. Built in over temperature alarm and protection allows for operation without attendant.
Specifications:

Maximum temperature	1200oC(for short time)
Working temperature	1150oC (continuous)
Heating rate	10-30oC/min, it will take 15-30minutes from room temperature to 1200oC
Tube material	quartz tube
Tube size	Dia 40x1200mm
Working size	600mm
Temperature control	16 steps programmable and PID automatic control
Voltage	AC 380V 3 Phase,50/60 Hz
Power	6KW
Heating element	resistance wire
Thermocouple	S-type
Furnace atmosphere	Nitrogen, Argon and other inert gases
Vacuum value	-0.098MPa
Standard accessories	high temperature gloves 1 pair, crucible tong 1pc,,power line 1 pc
Warranty	One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty.)