Products purpose
Sante muffle furnaces are applied to Colleges, Universities and Research institutions, process the sintering of cermet material and ceramic material, heat treatment of some monocrystal, refractory material reheat shrinkage researching under high temperature, and used for small batch production.
Main features:
1. Furnace chamber material use vacuum formed Al2O3 ceramic fiber materials, no powder pull off under high temperature, small heat capacity, and energy saving more than 50%.
2. Heavy duty double layer structure. Lower teperature in outside case.
3. Microcomputer PID control module, enabling precise temperature control and constant temperature requirements
4. Temperature control with 2groups/16 segments programmable.
5. Built in over temperature alarm and protection allows for operation without attendant.
Specifications:

Maximum temperature	1600oC(for short time)
Working temperature	1500oC (continuous)
Heating rate	0-30oC/min
Tube material	Al2O3 tube
Tube size	Dia60x1000mm
Working size	300mm
Temperature control	16 steps programmable and PID automatic control
Voltage	AC 208-240V Single Phase,50/60 Hz
Power	4KW
Heating element	MoSi2 rod
Thermocouple	B-type
Furnace atmosphere	Nitrogen, Argon and other inert gases
Vacuum value	-0.098MPa
Standard accessories	high temperature gloves 1 pair, crucible tong 1pc,,power line 1 pc
Warranty	One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty.)

 
Options:

1. Optional large screen paperless recorder, to achieve real-time temperature curve recorded with a memory card of experimental data analysis and printing.
2. Optional installation of air intake, can feed into air and inert gas.
3. Also install an exhaust chimney connecting stainless steel bellows, so that the furnace high temperature volatile toxic gas emissions to a specified location.