Main features:
1. Furnace chamber material use vacuum formed Al2O3 ceramic fiber materials, no powder pull off under high temperature, small heat capacity, and energy saving more than 50%.
2. Heavy duty double layer structure. Lower teperature in outside case.
3. Microcomputer PID control module, enabling precise temperature control and constant temperature requirements
4. Temperature control with 2groups/16 segments programmable.
5. Built in over temperature alarm and protection allows for operation without attendant.
Specifications:
1. Furnace chamber material use vacuum formed Al2O3 ceramic fiber materials, no powder pull off under high temperature, small heat capacity, and energy saving more than 50%.
2. Heavy duty double layer structure. Lower teperature in outside case.
3. Microcomputer PID control module, enabling precise temperature control and constant temperature requirements
4. Temperature control with 2groups/16 segments programmable.
5. Built in over temperature alarm and protection allows for operation without attendant.
Specifications:
| Maximum temperature | 1000oC(for short time) |
| Working temperature | 950oC (continuous) |
| Heating rate | 10-30oC/min, it will take 15-30minutes from room temperature to 1000oC |
|
Chamber size |
Chamber size:100*100*100)(W*L*H) capacity:1Liter |
| Temperature control | 16 steps programmable and PID automatic control |
|
Voltage |
AC 208-240V Single Phase,50/60 Hz |
|
Power |
1KW |
| Heating element | Resistance wires |
| Thermocouple | K-type |
|
Standard accessories |
high temperature gloves 1 pair, crucible tong 1pc, Al2O3 sample block 1pc,power line 1 pc |
| Warranty | One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty.) |