| Model Number: | 27 |
|---|---|
| Place of Origin: | China (Mainland) |
| Measuring medium: | Various gases (Except acetylene) |
| Size of pipeline: | DN10-DN4000 |
| Accuracy: | 1.0% |
| Working pressure: | Medium pressure4MPa |
| Power supply: | 220VAC/ 24VDC |
| Response speed: | 1S |
| Output signal: | 4-20mA RS485 HART |
| Pipeline Material: | Carbon steel stainless steel plastic |
| Display: | Four line LCD display |
Quick Details
Specifications
Applacation
- Oxygen, nitrogen, hydrogen, chlorine and multicomponent gas measurement.
- Low blast furnace gas, coke oven gas measurement.
- Low flue gas measurement.
- Low biogas, aeration and chlorine gas measurement in water treatment.
- Low compressed air measurement.
- Natural gas, liquefied petroleum gas, the torch gas, such as gas flow measurement
- Low power plant a wind blast furnace, secondary air flow measurement
- Low discharge chimney flue gas flow (speed) of measurement (CEMS)
- Low calcination furnace flue gas flow measurement
- Low cement, cigarettes, glass production process gas flow measurement
Technical parameters
|
Measuring medium |
Various gases (Except acetylene) |
||
|
Size of pipeline |
DN10-4000mm |
DN25-2000mm |
|
|
Flow rate range |
0.5-120Nm/s |
||
|
Accuracy |
±1% |
||
|
Working Temperature |
Sensor: Normal T:-10-200℃ High T:-10-350℃ Tranducer:-20-45℃ |
||
|
Working pressure |
Medium pressure≤2.5MPa |
Medium pressure≤4MPa |
|
|
Power supply |
Integrate type: 24VDC or 220VAC≤18W Split type:220VAC≤19w |
||
|
Response speed |
1S |
||
|
Output signal |
4-20mA RS485 HART |
||
|
Pipeline Material |
Carbon steel stainless steel plastic |
||
|
Display |
Four line LCD display |
||
|
Display content |
Mass flow rate, the state of the volume flow, cumulative flow, standard time, cumulative operation time, and the standard flow velocity, etc |
||
|
Protection grade |
IP67 |
||
|
Sensor material |
Stainless steel |
Stainless steel, carbon steel |
|