FUnction description:

this is a automatic testing and grouping machine for tappet, only need the operator or robot to place the visible qualified tappet on the conveyor Belt. the pick& place arm will automatically transfer the products to the  inspecting position, then start cleaning up The dust and inspect the Hardness, flaw, surface, OD, base thickness and positive & negative T Value. If the inspecting result is 1, it's good product in this group; if the Result is 10, it's T1 group; if the result is 12, it's T2 group. If the result Is Greater than 1 and not equal to 11,12, it's NG product. Laser marking The  Good products of this  group and T1,T2 products, the marking Content is Produced by the system automatically. after marking, the machine Will clean up The dust,inspect the byte photos and the unloading Manipulator will auto group Good products; spray oil on them and the flipping Manipulator will place the Finish products on the conveyor belt  and the operator will pick them up and place To the related box; the NG products will be collected
and place in the NG box. 

Specification:

1, Output volume 1200pcs/h

2,Pass rate≥99%

3,Activation≥98%

4,Workstation:12

5, Equipment life≥10 years

6. Operating voltage: AC 380V,3Φ,50/60Hz

7. Power: 12KW

8.Air pressure: 0.5-0.6Mpa

9,Operation: PLC + touch scream

10,Size: 3000mmX2000mmX1800mm(L*W*H)

Advantage:

1,Save manpower:24

2,Production capacity increase: 150%

3,Investment return cycle: 12 Months.

4,R&D can offer you optimize Design solution base on your requirement.

5,Provide training course for User.

 

Packing & Shipping

Packing:

Export Standard container or as Per customer indicated requirement.

Shipping:

1,Sea shipping and air shipping Are available.

2,Please confirm if you can make Clearance when goods reach your customs.

 

Our Service:

1,24hours respond for electrical Issue.

2,48hours offer solution for mechanical Issue. Base on problem situation, offer 3,service engineer to customer site for Support.

4,Machine spare part in stock.