High Frequency Edge Gluer for Solid Wood Panel Making---CHANCS MACHINE
 
1. Introduction.
High frequency edge glued panel press is calso called high frequency edge gluer, hf hot press machine, or radio frequency laminating press, which is advanced technology for panel making. HF generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, glue molecules are polarized - rotated - heated by friction.  High frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. So High frequency edge glued panel joining press only heat glue line but not the whole panel, saving much power and time, improving the efficiency a lot. Tons of vertical pressure assure flatness of panel, even can correct the curved panel slightly. Machine can help customer save a lot of wood material for next sanding procession. 
 
2. Features of High frequency edge glued panel joining press
1). High efficiency: HF heating 1-2minutes finish one standard panel(8x4 feet, 20mm thick ).
2).Low power costs: HF power only heat glue line, save the power. (0.6-1 kwh per panel)
3).Labor saving: Automatic control. One can finish whole cycle.
4).No pollution: HF power only needs electricity, dust free and clean. 
5). High yield percentage: Keep panel flat and save sanding material.
6).High performance: OMRON, SCHNEIDER, MOELLER etc international components used inside.
7).Easy to maintain: Machine fault self-checking system and alarm. 
3. Specification