| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|
Quick Details
Specifications
※Polyethylene pipe low cost solutions, the equipment can make 315mm diameter 630mm to the angle of bend, tee, diameter four-way dozens of pipe fittings, making 45 DEG and 60 DEG Y-shaped tee (optional Y type fixture), but also for the production of complex pipe assembly (narrow selection of fixture and flange clamp, etc.).
※
Equipment through the EU CE certification; the main electrical components are all using ABB, Schneider or SIEMENS components; the main hydraulic valve parts manufactured in Taiwan, reliable and stable performance.
※
Can choose automatic touch screen control cabinet, automatic welding.
Technical Parameters:
|
Equipment model |
SHG630 |
|
Applicable material |
PE, PP |
|
Can make the largest diameter of elbow |
630 mm |
|
Maximum three pass outside diameter can be made |
630 mm |
|
Maximum four pass outside diameter can be made |
630 mm |
|
Can make the largest Y type pipe fitting outside diameter (need to be equipped with another fixture) |
630 mm |
|
Applicable ambient temperature |
－5～45℃ |
|
input voltage |
～400 V±10% |
|
frequency |
50 Hz |
|
Total current |
49.6A |
|
Total power |
29.5KW |
|
Among them: heating plate |
22KW |
|
Planning tool |
3KW |
|
Hydraulic tank A |
3KW |
|
Hydraulic station B |
1.5Kw |
|
Whole to ground insulation resistance |
>1MΩ |
|
Maximum working pressure |
12 MPa |
|
Cylinder piston area |
19.63 cm2 |
|
Surface coating maximum temperature resistance |
270℃ |
|
Surface temperature difference of heating plate |
±7℃ |
|
noise |
＜70 dB |
|
Tank volume |
32L |
|
Hydraulic oil |
40～50mm2/s |
|
Total weight, kg |
6200 |