| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|
Quick Details
Specifications
※Polyethylene pipe low cost solutions, the equipment can make 630mm diameter 1000mm to the angle of bend, tee, diameter four-way dozens of pipe fittings, making 45 DEG and 60 DEG Y-shaped tee (optional Y type fixture), but also for the production of complex pipe assembly (narrow selection of fixture and flange clamp, etc.).
※Equipment through the EU CE certification; the main electrical components are all using ABB, Schneider or SIEMENS components; the main hydraulic valve parts manufactured in Taiwan, reliable and stable performance.
※Can choose automatic touch screen control cabinet, automatic welding.
Technical Parameters:
|
Equipment model |
SHG1000 |
|
Applicable material |
PE, PP |
|
Can make the largest diameter of elbow |
1000 mm |
|
Maximum three pass outside diameter can be made |
1000 mm |
|
Maximum four pass outside diameter can be made |
1000 mm |
|
Can make the largest Y type pipe fitting outside diameter (need to be equipped with another fixture) |
1000mm |
|
Applicable ambient temperature |
－5～45℃ |
|
input voltage |
～400 V±10% |
|
frequency |
50 Hz |
|
Total current |
100A |
|
Total power |
73KW |
|
Among them: heating plate |
60KW |
|
Planning tool |
4KW |
|
Hydraulic unit A |
7.5KW |
|
Hydraulic unit B |
1.5Kw |
|
Whole to ground insulation resistance |
>1MΩ |
|
Maximum working pressure |
16 MPa |
|
Cylinder piston area |
38.46 cm2 |
|
Surface coating maximum temperature resistance |
270℃ |
|
Surface temperature difference of heating plate |
±10℃ |
|
noise |
＜70 dB |
|
Tank volume |
50L |
|
Hydraulic oil |
40～50mm2/s |
|
Total weight, kg |
16000 kg |