copper conductor rubber insulation battery cable

1, Application

Welding Cables are flame retardant, oil resistant, resilient, resists compression cuts and abrasion,

durable, and survives rough handling.

Designed for use as arc welding leads from the secondary side of the power source, typical of welders and welding generators. Not for primary voltage.  

2, Construction

Welding Cables are manufactured using annealed rope-stranded bare copper conductor as per ICEAS-75-381.

A paper tape separates the conductor insulation. A medium-duty EPR jacket is extruded onto the cable.

EP or Hypalon jackets are available. 600 volt spark tested.

3, Standard

ASTM B-3 ASTM B1732, ICEA S-175-381, IEC 254-1.

4, Specification

Medium Duty jacket made accordance with ICEA S-75-381 - Portable and Power Feeder Cables for Use in Mines and Similar Locations or IEC 245-1 600 Volt Spark tested

5, Technical data

Conductor Size(AWG)	Conductor Stranding (#/AWG)	Nominal Resistance of Conductor at 25°C (Ohms / 1000 ft)	Nominal Thickness of Insulation (Inches)	Nominal overall Diameter (Inches)	Approximate Net Weight (LBS/1000 Ft)
2	652 / 30	0.167	0.071	0.48	260
1/0	1043 / 30	0.105	0.079	0.57	400
2/0	1297 / 30	0.0842	0.079	0.64	500
4/0	2065 / 30	0.053	0.079	0.77	760