| Application: | Used |
|---|---|
| Diameter: | 1.6mm 2.0mm 2.5mm 3.2mm 4.0mm |
| Operating Temperature: | Standard Temperature |
| Welding Current: | International Standard |
| Operating Current: | Standard |
| Length: | as required |
| Material: | Copper / Copper Alloy |
| Model Number: | RBCuZn-C |
| Brand Name: | SSTS |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
SSTS-FLUX-COATED BRAZING ALLOY-----(STFCB-01(02))Rod&Wire
SSTS specialized in offering and produce the copper,copper alloy welding metal for used in: Motor manufactory, Shipping building manufactory,Locomotive power Systerm manufactory, airvation Manufactory and Radiator,etc.
ST-CFB Rod(Wire) Advantages of Flux Coated and Flux Cored Alloy Filler Metals:
Labor savings - Simplifies and eliminates a separate fluxing operation.
Produces stronger joints - Less flux entrapped inside the joint, leaving the braze joints with improved strength because the use of coated and cored products has been found to reduce flux inclusions at the joint interface.
Improved operations - the all in one product streamlines customer's supply chain, eliminating the need to buy flux and alloy, while also automating brazing and assembly with high velocity, single piece flow.
Multiple uses - Flux coating can be used for coating of bulk strip, rods, engineered preforms and discrete parts.
Reduced costs - Reduction of post braze cleaning and secondary finishing operations, thereby reducing overall metal-joining costs.
Waste reduction - Flux coating reduces the waste of too little or too much flux, and the consistent application of flux and alloy improves joint quality.
Exposure reduction - Flux contamination within components on plant equipment and in the waste water is dramatically reduced. Flux exposure to brazing personnel is reduced.
COpper and Zinc Brazing Alloy
Product Name |
AWS No. |
En14640 No. |
BS1845 No. |
Chemical Composition | |||||
Cu |
Sn |
Zn |
Si |
Ni |
Fe | ||||
Brass(Copper-zinc) |
RBCuZn-A |
CuZn40 |
/ |
57-61 |
0.25-1.0 |
Rem |
/ |
/ |
/ |
Brass(Copper-zinc) |
/ |
/ |
CZ6A |
58.5-61.5 |
0.2-0.5 |
Rem |
0.2-0.4 |
/ |
/ |
Brass(Copper-zinc) |
RBCuZn-B |
CuZn40Ni |
/ |
56-60 |
0.8-1.1 |
Rem |
/ |
0.2-0.8 |
/ |
Brass(Copper-zinc) |
RBCuZn-C |
/ |
/ |
56-60 |
/ |
Rem |
/ |
0.8-1.1 |
0.25-1.20 |
Nickel Silver |
RBCuZn-D |
CuZn40Ni10 |
CZ8 |
46-50 |
/ |
Rem |
/ |
9-11 |
/ |
Phos-Copper-Silver Brazing Alloys(Low Silver Brazing Alloy )
AWS No. |
Chemical Composition |
Characteristic |
Application | |||||||
Ag |
Cu |
P |
Sn |
Other |
Impurity |
Solify F/ |
Liquidfy F/ | |||
BCup-2 |
/ |
Rem |
6.8-7.5 |
/ |
/ |
0.15 |
1310/710 |
1472/790 |
Contain less Phosphors, has better plastic Nature, a little higher melting point. |
Used for copper and copper alloy parts, suitable for air conditioning, refrigerator, evaporator, heat Exchange and water Heater etc. |
BCup-3 |
4.8-5.2 |
Rem |
5.8-6.7 |
/ |
/ |
0.15 |
1189/643 |
1445/785 |
Along with increasing of Ag contents, strEngth will be better. |
Used for copper and copper, copper and brass parts with shock in air condition and freezer, copper and copper alloy tie-in electric motor Meter. Low P Content Suitable for ample Clearance, high P Content Suitable |
BCup-4 |
5.8-6.2 |
Rem |
6.8-7.5 |
/ |
/ |
0.15 |
1193/645 |
1335/724 |
Easy flow, good solder- ability, can instead SAgP-15(204). |
Low P content suitable for ample clearance, high P content suitable for gap tie--in, and brazing spectacle frame and ERW. |
BCup-5 |
14.5-15. |
5 Rem |
4.8-5.3 |
/ |
/ |
0.15 |
1193/645 |
1472/800 |
Easy flow, good solder- ability. |
Used for brazing copper and copper parts in air-conditional, freezer, compressor, electric motor. |
BCup-6 |
1.8-2.2 |
Rem |
6.8-7.5 |
/ |
/ |
0.15 |
1310/710 |
1472/790 |
Easy flow and plastic nature, high strEngth for be-in. |
Suitable for medium gap tie-in. |
BCup-7 |
4.6-5.2 |
Rem |
6.8-7.1 |
/ |
/ |
0.15 |
1193/645 |
1409/765 |
Along with increasing of Ag contents, strEngth will be better. |
Used for copper and copper, copper and brass parts with shock in air condition and freezer, copper and copper alloy tie-in electric motor Meter. Low P Content Suitable for ample Clearance, high P Content Suitable |
Silver-Copper-Zinc Brazing Alloy(High Silver Brazing Alloys)
AWS No. |
Chemical Composition |
Characteristic |
Application | |||||||
Ag |
Cu |
Zn |
Sn |
Other |
Impurity |
Solify F/ |
Liquidfy F/ | |||
BAG-24 |
49-51 |
19-21 |
26-30 |
/ |
Ni1.5-2.5 |
0.15 |
1220/660 |
1301/705 |
Low melting point, good braze ability, high strEngth. |
Used for steel, stainless steel, copper alloy brazing. |
BAG-20 |
29-31 |
37-39 |
30-34 |
/ |
/ |
0.15 |
1250/677 |
1410/766 |
Brazing temperatureLower, tie-in comprehensive |
Used for steel, stainless steel, copper alloy and the other non-ferrous metals Brazing(except Ti and Mg). |
BAG-5 |
44-46 |
29-31 |
23-27 |
/ |
/ |
0.15 |
1229/665 |
1373/775 |
High strength, wide adaptability,easy flow. |
Applicable widely, used for electrical, motor electrical parts, dairy, food industry, steel copper, copper alloy brazing. |
BAG-6 |
49-51 |
33-35 |
14-18 |
/ |
/ |
0.15 |
1274/690 |
1427/775 |
High strength for tie-in, impact resistance, Good spread Ability. |
Used for electrical, dairy, food industry, steel copper, copper alloy brazing. |
Silver-Copper-Zinc-Cadmium Brazing Alloys(High Silver Brazing Alloys)
AWS No. |
Chemical Composition |
Characteristic |
Application | |||||||
Ag |
Cu |
Zn |
CD |
Other |
Impurity |
Solify F/ |
Liquidfy F/ | |||
BAG-12 |
29-31 |
27-29 |
20-22 |
20-22 |
/ |
0.15 |
1112/600 |
1274/690 |
Low melting point, good braze ability. |
Used for steel, copper alloy copper, nickel alloy. |
BAG-1 |
44-46 |
14-16 |
14-18 |
23-25 |
/ |
0.15 |
1103/595 |
1148/620 |
Low melting point, good braze ability easy flow. |
Used for copper and alloyed copper, steel and copper parts pope welding. Used for small gap tie-in. |
Product Size:1.6mm, 2.0mm, 2.5mm, 3.2mm, 4.0mm Packing:5kgs/box, 500kgs/carton
OEM packing
