|Place of Origin:||Turkey|
? We do not use Input China manufactured products. (Chinese equipment Connectors / Connectors and electronic circuit rather poor quality and in most cases the exporter / manufacturer and serial number, model number not clear, and probably without proper user manual)
? Certified Safe in respect of the electromagnetic field-EMC, intellectual property protection, international health and safety standards (certification can be potato Stamp)
? No Set Up Changing is not required for the Summer / Winter Seasnal adjustments and are resistant to vibration and impact (my Chinese equipment require adjustment in accordance with changes in temperature)
? Ability to detect ferrous and non-ferrous Metallic threat objects considered dangerous international security agencies. It can be detected by testing either singly or in combination.
? Give an alarm for all objects, threats detected in different zones alarm. (Chinese equipment detects large objects against threats while the other does not indicate exactly)
? Detects all threat objects even hidden, hidden camouflage and / or wrapped. It is impossible for such a threat objects to pass through the WTMD, without causing alarm.
? No interference between the zones and the lack of false alarms
? Multi-Zone - 6 Real detection zones (up / Medium / down and left / right)
? Do not uniform magnetic field - no blind spots - the same Detection Capability from bottom to top
? 10 sensitivity levels, 246 adjustable sensitivity steps at each
? Auto Calibration (Automatically calibrates to environmental conditions), No Set Up does not change, if necessary relocated and / or a new magnetic objects is close-By
? Simplicity and ease of Very Low Frequency VLF technology on human health, does not affect the Pace Makers, pregnant women and magnetic storage media (with certification of Chinese equipment must be carefully monitored)
? Green / Red bicolor traffic through LEDs allows for easy vision at a distance of 30 / minute
? Superior Discrimination, Precise target location identification / Graphic display area on the control unit
? Metal Density-Mass, Signal Strength Display at 10-level, the VU meter with green, yellow, red LEDs easily allows sight from distance
? Digital Environment magnetic noise level and visual detection and error code on the display Wide 4x20 characters LCD screen
? Adjustable audio alarm at 10 tons / level or Soundless operation (Mute).
? Incoming five-digit counter (Visible / Invisible)
? IR-Pass Sensor ON / OFF Selection
? Four-digit changeable digital PIN-code
? Automatic display of failure with continuous self-control of key parameters. (BITE - Built-in Test Equipment)
? Reloading the factory default settings by pressing the one-touch
? Easy programming and monitoring with a wide LCD display
? 4 languages menu Standard menu in English, German, Spanish and Turkish
? Relay output for video recording, Photo Taken-registration, control turnstiles, etc. Alarms on
? Additional -Uninterruptible power supply (UPS), allowing operation without network 2:00
? No seasonal adjustment is due to the requirement of Digital Electronic System (DSP)
? Easy to mount and assemble walk through metal detector (15 minutes) Male / Female Socket-Connector Design
? IP 20 level of protection (EN 60529)
? Manufactured for continuous operation 7/24
? 74 cm Net Passage width and 200 cm height of the net Passage
? Working without noise at a medium level of sensitivity 10 cm Distance Constant metals and 150 cm Distance Moving metal objects
? Audio-visual alarms are visible at a distance of 2 meters
? The microprocessor does not change when there is electricity cut-off
? Floor mounting resistant to corrosion of metal headers for proper assembly and use enduring.
? In accordance with CE and are certified in accordance with EN 61000-6-3, EN 61000-6-1 regulations.