Product Main

Quick Details

Brand Name: ThruScan
Place of Origin: Turkey


Walk Through Metal Detector ThruScan sXi

International standards (NILECJ-0601 L1-5 / IP65 / EN60950 class1) in accordance with the European Union CE standards and manufactured in accordance with ISO 9001: 2008 QMS
Certified in accordance with EN 61000-6-3, EN 61000-6-1 and rules in accordance with Directive 2002/95 / EC (restriction of the use of certain hazardous substances in electrical and electronic equipment), ECAC DOC 30 Standard 2, CE European Union Norms and produced in accordance with ISO 9001: 2008 QMS
Multi-Zone - 9 real Parallel detection zones
While normal operation, displays the input / output meters and level of security on the LCD without abbreviations so that Security personnel can easily understand,
Able to detect both ferrous and non-ferrous Metallic threat objects considered dangerous international security agencies.
Test objects can define either singly or in combination.
Displays found metal objects location on both rear and front side panels  from the bottom up by a continuous zone LED indicators
It detects all threat objects even hidden, hidden camouflage and / or wrapped. It is impossible for such a threat objects to pass through the WTMD, without causing alarm.
There is no interference between the zones and the lack of false alarms
A uniform magnetic field - No Dead Points - The same detection capabilities from the bottom up
It detects metals, regardless of their orientation
25 sensitivity levels, 246 adjustable sensitivity steps at each + 10 standard preloaded on the international security program. including  ECAC STD1, ECAC STD2, ECAC STD3 
Separate sensitivity settings for different detection zones
Random Alarm function allows you to scan a certain percentage of net visitor
The standard pre-set Jailhouse / AIRPORT / Military / Levels POLICE AREA / COMMERCIAL security programs 

Metal Density-Mass, Signal Strength Display at 10-level, the VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Pin point of identifying the target location with the graphic display area on the control unit
Automatic calibration (automatically calibrated to the ambient conditions), 
No Set Up does not change, if necessary relocated and / or a new magnetic objects is close-By
Health friendly Very Low Frequency VLF technology is human, the lack of impact on the Pace Makers, pregnant women and magnetic media
Green / Red bicolor traffic through LEDs easily allows sight from a distance of 60 / min and alarm LEDs on the side panels
Mode of operation, programming parameters and error codes are displayed on Wide 4x20 characters LCD screen
Visual display of magnetic interference from the environment
10 Adjustable audio tone with 10 levels of volume (Mute allows Operation)
IP 65 protection (EN 60529)
Five numbers of incoming / outgoing traffic counter (can be invisible)
Alarms are counted separately
No interference from the operation of other electronic devices and other electronic equipment responds. Necessary? Modifying precautions have been taken.
Four interchangeable digital PIN-code + mechanical lock
Automatic Failure Display with continuous self-monitoring of key parameters (BITE - Built-in Test Equipment)
Reloading the factory default settings by pressing the one-touch
Easy to program and the display with a high-resolution LCD (Liquid Crystal Display)
5 Languages menu Standard menu in English, German, Spanish, Turkish and Arabic
Relay output for video recording, photo Taken-entry turnstiles management, etc. alarms
STANDARD Integrated uninterruptible power supply (UPS), allowing operation without network 2:00
No seasonal adjustment requirement thanks to Digital Electronic System (DSP)
Easy to mount and assemble walk through metal detector (15 minutes) Male / Female Socket-plug design
Manufactured for continuous operation 24/7
74 cm Width Net Passage and 200 cm Height Net Passage
Without interference Work at the middle level Sensitivity 10 cm Distance Constant Metals and 150 cm at a distance Moving metal objects
Audio-visual alarms are visible at a distance of 4 meters
The microprocessor does not change when there is electricity cut-off
No interference with the Storage Media, Flash Memory, CD, floppy disks and other electronic devices
Electronic components (electronic control unit, power supply, battery, adapter, etc ...) are located inside the equipment. No external devices.
Corrosion-resistant metal, footers for good placement and durable use.
Vibration resistance and impact
Additional -SCADA program-controlled remote data communication and networking of several metal detectors; The software to change settings via PC (digital output for connection to the network)
Manufactured using the latest technology and best components