| Usage: | static tester |
|---|---|
| Power: | Electronic |
| Model Number: | ESD112 |
| Brand Name: | Koten |
| Place of Origin: | China (Mainland) |
| Installation type: | embedded in turnstiles/gates |
| Dimension: | 1200*280*980mm |
| Lane width: | 600mm |
Quick Details
Specifications
ESD Tripod Turnstile Access Control System
ESD access control System, anti-static access channel, stand-alone systems (integrated human Static test access channel gate) is a combination of static test ban control Gate and channel advanced products; in many settings electrostatic protection Areas (EPA) in places where static footwear and static wrist strap testing are Based on the traditional way of testing only be, difficult to implement Untested first time by personnel prohibited from entering the case of the EPA; ESD access control system for this shortcoming, direct and effective solution to the problem, workers entering the EPA zone really good staff wear or Anti-static wrist strap shoes ready, combine three roller gates, wing gates, Swing gates, automatic door sensors, etc.. As electronic locks or access gates ESD anti-static test personnel access control equipment. Plant personnel can Provide basic access control functions and static test ways and orderly Civilization, did not enter the EPA to eliminate electrostatic protection areas by electrostatic testers, and rapid control off the rod or gate, organize Evacuations in case of emergency.
A. Body Static Tester PE168-STG (resistance display and output):
Power supply |
8-12V DC 100mA, supplied by Turnstile/gate |
|
606g±5% |
Voltage and current |
Maximum voltage: ± 400V
(peak, DC or AC) |
Material |
Metal shell |
TestRange |
100KΩ~1000MΩ |
Test Accuracy |
±10% |
Communication Interface |
RS-485 |
Working temperature and Humidity |
-10-70 Degrees Celsius Indoor use, about 60 percent humidity |
Resistance display |
Have |
LCD Display |
2.4-inch color Touch-screen display, cell display resistance at a glance |
the level of standard Setting |
Single use: from the
Touch screen to enter the administrator password is set via |
Testable wrist footwear |
Single-wire wrist strap, Double wrist band, left shoes and right shoes |
Wrist strap jack |
2-hole single line, Double 2-hole |
Test button |
Touch-type, non-ordinary Button shrapnel, durable |
Open signal output |
Access includes opening and closing signal output (dryContact) |
the tester according to GJB 3007-97, SJ / T 10694-2006 and
ANSI ESD S20.20 standard production, is able to quickly and easily test a wrist
Strap and foot ring, conductive shoes or wearing anti-static shoes devices
Circumstances, practical measurement range of 0.1MΩ ~ 1000MΩ, less than 10%
Full scale accuracy. Tester operation is very simple, green values indicate
Normal, yellow values are expressed as close to the limit value, while red
Indicates that the test failed value (specific methods see test instructions).
the user can set the relevant parameters required tests.
1. Test the resistance line with international standards, the standard gear can
Be set, you can test a single line and double wrist band;
2. Touch the test, not for a key or button type, avoidContactwith bad or no
Prolonged use;
3. the tester should distinguish between left and right foot pedals to comply
with international norms, it can not only be a foot pedal to the metal for
Testing;
4. between static tester and control system signal cable pluggable, convenient
Static tester censorship when disassembly.
5. the test results with the tester near failure alerts, when the test results
below the lower limit or above the upper limit, the tester screen will use measured
Resistance value is displayed in red. When the test results (but not adjacent
to a standard higher than the high standard or below the low standard) between
the past and the level of the upper and lower standard, will use yellow shows
the measured resistance value (in this case, although do reminders, but still
Qualified). When the test results within the upper and lower limits in the
past, will be used to display the measured resistance value of the green;
6. When the sound is turned on, when any were tested failed, the buzzer will
Sound three times, all when qualified, chirping loudly;
7. the self-LCD touch screen, the manager can easily set a password ESD
Resistance standard and nearly fail to remind resistance standards. Good
Resistance to standard display settings on the LCD screen, easy to use staff
Know the current resistance level of standard use. Set a good resistance will
Be displayed in the LCD screen a small box, managers can clearly know now set
Resistance (blue font for the low-end resistance standard, red font for high
Resistance standard)
8. Test speed, stand-alone use within one second complete results showed,
Display digitized resistance and distinguish colors (red exceeded, nearly fail
Yellow, green qualified);
9. Wrist strap jack hole tester more than double the reserve, and have single,
Double perforated wrist, and separately displayed on the LCD screen;
10. the metal shell, the test button is touch-sensitive, non-ordinary button
Shrapnel style, durable.
