ESD Access Control System

1. Test the resistance line with international standards, the standard gear can be set, you can test a single line and double wrist band;
2. Touch the test, not for a key or button type, avoid contact with bad or no prolonged use;
3. The tester should distinguish between left and right foot pedals to comply with international norms, it can not only be a foot pedal to the metal for testing;
4. Between static tester and control system signal cable pluggable, convenient static tester censorship when disassembly.
5. The test results with the tester near failure alerts, when the test results below the lower limit or above the upper limit, the tester screen will use measured resistance value is displayed in red. When the test results (but not adjacent to a standard higher than the high standard or below the low standard) between the past and the level of the upper and lower standard, will use yellow shows the measured resistance value (in this case, although do reminders, but still qualified). When the test results within the upper and lower limits in the past, will be used to display the measured resistance value of the green;
6. When the sound is turned on, when any were tested failed, the buzzer will sound three times, all when qualified, chirping loudly;
7. The self-LCD touch screen, the manager can easily set a password ESD resistance standard and nearly fail to remind resistance standards. Good resistance to standard display settings on the LCD screen, easy to use staff know the current resistance level of standard use. Set a good resistance will be displayed in the LCD screen a small box, managers can clearly know now set resistance (blue font for the low-end resistance standard, red font for high resistance standard)
8. Test speed, stand-alone use within one second complete results showed, display digitized resistance and distinguish colors (red exceeded, nearly fail yellow, green qualified);
9. Wrist strap jack hole tester more than double the reserve, and have single, double perforated wrist, and separately displayed on the LCD screen;
10. The metal shell, the test button is touch-sensitive, non-ordinary button shrapnel style, durable.

 

System components:

1. Entrance control gate/turnstile: Tripod Turnstile, Flap Barrier Gate, Swing Gate etc.

2. ESD Device

ESD access control system, anti-static access channel, stand-alone systems (integrated human static test access channel gate) is a combination of static test ban control gate and channel advanced products; in many settings electrostatic protection areas (EPA) in places where static footwear and static wrist strap testing are based on the traditional way of testing only be, difficult to implement untested first time by personnel prohibited from entering the case of the EPA; ESD access control system for this shortcoming, direct and effective solution to the problem, workers entering the EPA zone really good staff wear or anti-static wrist strap shoes ready, combine three roller gates, wing gates, swing gates, automatic door sensors, etc .. as electronic locks or access gates ESD anti-static test personnel access control equipment . Plant personnel can provide basic access control functions and static test ways and orderly civilization, did not enter the EPA to eliminate electrostatic protection areas by electrostatic testers, and rapid control off the rod or gate, organize evacuations in case of emergency.