Model Number: | LS-RDIO0808 |
---|---|
Brand Name: | Lensen |
Place of Origin: | China (Mainland) |
Master: | 1 LS-R324 |
Slaves: | 4 LS-RDIO0808 |
Control distance: | 2km |
Quick Details
Specifications
Features:
Radio based, no need internet, no monthly fee
Support Modbus RTU protocol
2km LOS control distance
Technical details:
Introduction of LS-R324
LS-R324 is a 1W radio modem, transmit 3km LOS. It supports UHF band, 24V power supply. Usually works as DTU to connect with PLC and other industrial control devices. LS-R324 Supports RS485 Modbus RTU protocol. Has the advantage of register data restore function.
Application:
· Water/waste water treatment field
· Wind speed, rainfall, humidity etc data collection
· Temperature, humidity, concentrations of CO2 etc data collection
· Wireless data collection and transmission
· Wireless communication between PLC and sensors
Parameter:
· Power output: 24V DC
· RF power: 1W
· Air baud rate: 1,200/2,400/4,800/9,600/19,200bps choose one
· Interface baud rate: 1,200/2,400/4,800/9,600/19,200bps programmable
· Frequency band: 433, 450, 470 or others
· Interface: Standard RS-232/RS-485/TTL/USB
· Communication mode: Half-duplex
· Channel: 8(default), 16/32(customized)
· Receive current: <45mA (TTL connect)
· Receive sensitivity: -123dBm @ 1,200bps); -118dBm @ 9,600bps)
· Transmitting current: <500mA
· RF line-of-sight range: 2km (); 3km (BER=10-5 @ 1,200bps)
· Size: 175*115*32mm (without antenna port)
Pin Definition:
Support RS232, RS485, USB, you can use DIP switch to program
Introduction of LS-RDIO0808
LS-RDIO0808 Modbus RTU is a 1W I/O module, 8 isolated digital inputs, 8 isolated relay outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for pump control, water level monitoring, and motor, valve, light ON-off wireless control.
· Transparent I/O System, no programming required
· Not need internet, no third party cell, no monthly fees
· You have full control over your own carrier
· Real time status feedback from the remote site
· Fast installation and easy setup
Parameter:
· Input: 8 isolated digital active inputs (passive input customize)
· Output: 8 isolated relay passive contact outputs, contact load AC, DC.(active output customize)
· Protocol: Modbus RTU
· Collocated with a wireless data module whose transmitting distance is about 2km-3km; the working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm
· Receiving current: <50mA; transmitting current: 600mA
· Power supply: DC 9V-36V
· Dimension: 145mm*90mm*40mm
· Application:
· Lighting Control Systems
· Wireless Pump Control?
· Wireless Valve Actuation?
· Conveyor Control
· Grain Augers
· Engine Control
· Tank Level Monitoring
· PLC Activation
· SCADA
Operation method of useage:
Pump control
Tank level control
Irrigation wireless control
Lights on-off control
Wireless alarm system
Package:
Standard
1 LS-R324
4 LS-RDIO0808
5 magnetic antenna