The following example is for you reference.


1.Brief Introduction:

 
 Gasketed plate heat exchanger
This type of exchanger is the most efficient type of heat exchanger with its low cost, flexibility, easy maintenance, and high
thermal transfer.
The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The
plates are fitted with a gasket which seals the interplate channel and directs the fluids into alternate channels. The number of
plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature p
 

2.Techincal parameters:

  Main parameters
＊ ±0.1mm accuracy of groove
＊ Maximum temperature can reach 180℃
＊ Maximum working pressure can reach 25 bar
＊ The diameter of porthole can reach 450mm
 

3.Performance features:

＊ High Heat Transfer Efficiency

The flow turbulence inside plate heat exchanger maximizes heat transfer
performance. Because of the high efficiency plate heat exchanger can handle
temperature approaches of less than 1℃ (2° F).

＊ Compact Design

With service and maintenance space included, plate heat exchanger takes
up only 20% space of what shell & tube heat exchanger takes because of the
compact arrangement.

＊ Self-Cleaning Action

During operation, the fluid flow and the resulting turbulence can continue to
remove dirt deposition from heat transfer surfaces, thus reducing fouling.

＊ Long Service Life
＊ Modularity for Flexibility

This modular exchanger obtains a variety of configurations through various
combinations of framework, plates and connection to meet the needs of a
wide range of applications.

＊ No Mixing of Medium

The seal groove of plate heat exchanger form special drainage channels with
which fluids are not allowed to mix. Even if there is leakage, the media always
exude outward.


Typical uses
Water/Water duties
The largest part of our production heat exchangers is used for Water/Water
duties, i.e. water heated or cooled with water.
＊ District heating
＊ Tap water heating
＊ Swimming pool heating
＊ Heat recovery (engine cooling)
＊ Temperature control of fish farms
＊ Steel industry-furnace cooling
＊ Power industry-central cooling
＊ Chemical industry-process cooling
Water/Oil duties
＊ Hydraulic oil cooling
＊ Quench oil cooling
＊ Cooling of motor oil in engine test beds
Water/Glycol duties
＊ As an intercooler in a heat pump
＊ Chilled water production in food factories
＊ Cooling of air conditioning circuits
＊ Solar heating systems

Spares
We have hundreds of types of plate and gasket for customers' choices, with the
most complete range, perfect quality and irresistible prices.
Plate material: SS304, 316L, Titanium, Nickel, 254Mo, Hastelloy
Plate thickness: 0.5mm, 0.6mm
Gasket material: NBR, EPDM, FPM, Silicone rubber
Food-grade material and other materials suitable for special working conditions,
like elevated or low temperature conditions, are also available.