microwave atmosphere sintering furnace
Item: LF-QS4516
Voltage: 220±10V  50Hz  Three Phrase
Rated Power: 9KW
Microwave Power: 0.01～4.20kW  Continuous Adjustable
Microwave Frequency: 2.45GHz±25MHz
Ultimate Temperature: 1600℃
Working Temperature: 1550℃
Heating Space: Φ150×120mm(Dia×H)
Temperature Rising Rate: Heating Rate≥40℃/min
Temperature Measured By: Infrared Thermometer
Temperature Control Range: 300～1800℃
Temperature Control Accuracy: readout±0.5%
Static Vaccum Degree ≤10Pa
Vacuum System: vacuum pump, dual-atmosphere control conduit,quick evacuation can be filled with oxidizing gas, inert gas, reduction gas,etc
 Sintering Platform Rotation Rate: 4-6rpm
Control System: every curve can set 40 paragraphs of parameters; data storage;export data; Manual mode, Auto-Mode,constant temperature control, display real - time data curve; dynamic data screen
Microwave Leakage: ＜0.1mW/cm2
Alarm: over heating and over current alarming
Furnace Door: Safety Safety Interlock Switches
High Precision Water Chiller: flow: 2m3/h, rated coolant capacity:3.6KW
Main Part:2100×1100×1800mm(LXWXH)
Floor Area: 2m2
Suitable for synthesis process, calcination, heat treatment, sintering under  various atmosphere conditions.
Ceramics and metal heat treatment, brazing, hardening,  annealing, sintering, and debinding in atmosphere, protective gas, or vacuum. Systems for batch or continuous operation.
 
Batch and continuous microwave  systems for applications in drying and sterilizing of bulk materials, insulation materials, pharmaceutical products, technical ceramics and natural produce. Other applications include hardening of plastics, debinding and sintering units for ceramics  and sintered metals, as well as flow  heaters.
 
Batch and continuous microwave systems for applications in drying and sterilizing of bulk materials, insulation materials, pharmaceutical products, technical ceramics and natural produce.
Other applications include hardening of plastics, debinding and sintering units for ceramics  and sintered metals, as well as flow heaters.
 
III..Application range 
 
 This product is mainly used for calcining materials / synthesis process and experimental study of small batch production. The main application areas are as follows:
 
1)Metal carbide, nitride, oxide material reduction / roasting / calcination / synthesis / sintering;
 
2)Sintering of battery materials;
 
3)Sintering of catalytic material 
 
4)Sintering of various ceramic materials
 
5)Rare earth fluorescent materials synthesis / Sintering;
 
6)Powder metallurgy, carbide sintering;
 
7)Vacuum sintering of magnetic materials.
 
Microwave Annealing
Microwave Ashing 
Microwave Carbonization
Microwave Catalysis
Microwave Calcination 
Microwave Ceramic Injection Moulding 
Microwave Crystal Growth 
Microwave Curing 
Microwave Drying 
Microwave Metal Injection Moulding
Microwave Nitridation
Microwave Pyrolysis
Microwave Siliconization 
Microwave Sintering 
Microwave Sulfonation
Microwave Vacuum Brazing 
Microwave Vacuum Soldering
Microwave Wax Burns-out;
 
 
 
III.Our main products list:
 
1.900oC Microwave Graphite and Graphene Expansion Furnace 
LF-PH9010 microwave expansion furnace is designed  especially for graphite and graphene expansion.composed of furnace, microwave heating system, insulation system, feeding and discharge system and control system. complete expansion within 3-5 seconds, automatic feeding and discharging system.
Output per day:10-20kgs/day 
1600oC Microwave high temperature Sintering Furnace

2.1200oC Microwave Muffle Furnace
Suitable for synthesis process, calcination, heat treatment, sintering atmosphere under various atmosphere conditions.
 
3.1600oC Microwave High Temperature Muffle Furnace
Suitable for synthesis process, calcination, heat treatment, sintering atmosphere under various atmosphere conditions.
1600oC Microwave high temperature Sintering Furnace

4.1200oC Microwave Tube Furnace
Suitable for synthesis process, calcination, heat treatment, sintering under  various atmosphere conditions.

5.1600oC Microwave High Temperature Tube Furnace
Suitable for synthesis process, calcination, heat treatment, pyrolysis, sintering under  various atmosphere conditions.working temperature:1550 degree celcius; heating space:dia 40x130mm;
Heat Treatment Solutions Provider- Standarized Or Customized
1600oC Microwave high temperature Sintering Furnace

6.1200oC Microwave Atmosphere Lab Furnace
Suitable for synthesis process, calcination, heat treatment, sintering under  various atmosphere conditions.

7.1600oC Microwave Atmosphere Lab Furnace
Suitable for synthesis process, calcination, heat treatment, sintering under  various atmosphere conditions.
8.1600oC Microwave Atmosphere Sintering Furnace
Suitable for synthesis process, calcination, heat treatment, sintering under  various atmosphere conditions.

9.1600oC Microwave Vacuum Sintering Furnace
Suitable for synthesis process, calcination, heat treatment, sintering under  various atmosphere conditions. working temperature: 1600 degree celcius, 1500 degree celcius. different heating space for selection.Heat Treatment Solutions Provider- Standarized Or Customized
10.1200oC Microwave Pyrolysis Furnace
1.applicable for continuous microwave pyrolysis, pyrolysis of microwave experiment and small scale production for chemical and biological substances, coal, garbage, plastic and other materials;
2.continuous automatic operation, continuous feeding and discharging;
horizontal structure with conveyor belt, to facilitate feeding and discharging
Output: 0.6-1kg/hour;
Max output we can produce currently: 2-3T/24hour;

11.1600oC Microwave Atmosphere Pusher Kiln
 
1. fire all kinds of metal carbides, nitrides and other materials; vanadium nitride, silicon nitride, vanadium carbide, etc;
2. sintered magnetic material, ferrite, NdFeB;
3. fire electronic ceramic ; PTC electro-sensitive components, barium titanate, strontium and barium;
4. Carbon Thermal Reduction: synthetic diamond catalyst reduction roasting;
5. The structure of the ceramic firing: zirconium oxide, zinc oxide, yttrium oxide structural ceramics;
 1600oC Microwave high temperature Sintering Furnace
12.1600oC Microwave Zirconia Denture Sintering Furnace
1) moderate capacity, enabling full-bridge sintering
2) removable insulation system, easy for maintenance;
3) manual and automatic sintering modes;
5) rapid heating rates, 10-100 ℃ adjustable;
6) short sintering cycle, delivery within a day;
7) enable single crowns, multiple crowns and full contour bridges sintering 
8) heating speed, temperature uniformity;
9) equipped with PLC computer control system, manual and automatic operating modes can be freely switched;
10) various specifications, models of crucibles and insulation for safe selection without polluting materials;
11) safe and reliable microwave shielding design, multiple anti-leak protection.
 
 
IV.RFQ:
1)What materials you need sintering? We need to know the property of  your material, moisture content, the chemical composition, any volatile composition?

2)How much volume required to process per batch? We have different size for choice,
150×110×70mm;200×200×100mm;130×80×70mm;40×130mm;125×100mm;125×100mm;etc; customized furnace is available. 

3)Do you have any requirements about crucible? The material of crucible adopted by us:SiC, SiC + corumdum mullite; SiO;

4)What the highest temperature you need up to? 
1200C,1600C,1650C,1700C,1800C;

5)Do you have requirements on atmosphere? 
We can provide: air atmosphere, reducing atmosphere,inert atmosphere,
 inlet N2 atmosphere, vacuum atmosphere, etc;
 
6) The average heating rate:30~40C per minute.
 
7) Guarantee: One year, without the consumable material, thermal material, crusibles,
 sagger;
Technolog support for whole lifetime,