Technical parameter

Working voltage

380V/50HZ

Air pressure

0.4-0.6MPa

Total power

30KW

Central height

1000mm

No. of winding head

2

Distance between two winding heads

411mm

Winding speed

9-95rpm

Winding diameter

Max 32mm

Traction speed

0.1-1.0m/min

Traction force

Max 40KN

Clamping length

1200mm

Clamping width

500mm

Cutting envelope

500(W)x85mm(H)

Cutting rotation speed

2850rpm

Tracing cutting journey

700mm

Length fixed

Limit switch

Dimension

22000x1850x1450mm

Characteristics

1. the machine consists of roving racks, resin bath, winding, unwinding,heating oven, traction machine, cutter and racks for finished products.

2. Winding device adopts gear drive to wind the bolt thread, the winding speed is controlled by frequency inverter.

3. Unwinding device adopts pros-and-cons gear crew drive to achieve reciprocating unwinding.

4. Heating oven adopts cast aluminium heater and intelligent temperature controller. the heating box is mesh structure which is easy to open to clean the dropping resin, filled with insulation materials inside the box.

5. the machine can produce two pieces of rebar at the same time.