Product Name: Compound Ferric Green 5605(Iron Oxide Green 5605)
Color Index: Pigment Yellow42:77492, Pigment Blue15:3:74160
CAS No.: 51274-00-1,147-14-8
Molecular Formula: Fe2O3?H2O,C32H16N8Cu
Molecular Weight: 177.7  
Technical Data Sheet

Iron Oxide Green 5605
Density(g/cm3)	3.5
Appearance	Green powder
Content of Fe2O3 %	88 min
PH Value	6.0min
Oil Absorption	25-35
Residue on 320 mesh,%	0.3max
Water soluble, %	2.0 max
Volatile at 105 degree	1.0 max
Tinting strength, %	98-102

Note: the data contained here are based on our current knowledge and experience. It is the responsibility of user to test our products before the final application.

EMPEROR OXIDE GREEN for COATING COLORS:Iron oxide green is also called compound ferric green, it is green powder with bright green and deep green, Its characterize as

• Strong tighting strength
• High hiding ability
• Easy dispersion
• Good light fastness
• Weather fastness

Advantage of " EMPEROR" iron oxide green on Paint industry:

as iron oxide green excellent on acid and alkali resistant used on coating industry, also low cost, it will widely used on exterior paint and primer. after years of development, Our product range of green iron oxide 5605, 835 etc.

Direction for used on coating industry:

• 1: the iron oxide suitable for the coloring and protection of all kinds of paints and coatings. Such as alkyd resins, amino alkyd, vinyl chloride resin, polyurethane, nitro, polyester paint. In addition, also applies to the electrophoretic paint. Primer, enamel, pencil paint, mixed paint, baking, anti-rust paint, floor paint waterline paint. It can be used for water based coatings, powder coatings and plastic coatings. and paint used in toys, decorative paint, furniture paint, house paint, paint the garage, parking lot paint, automobile paint, and so on.
• 2: Usage method: Generally divided into three steps: wetting, grinding and dispersion (paint). Iron oxide pigments and paints, fillers for ingredient mixing tank, dubbed coarse paste, depending on the amount of solvent added to the viscosity of the resulting employ different milling equipment, such as mastics available triple roll mill fine, thin pulp available efficient sand mill (vertical or horizontal) or a ball mill. Primer is generally about 50 microns, about 40 microns finish requirements, and then in the paint tank, add resin, drier, solvent to dispersion(paint), coloring, adjust the viscosity, and finally Filtered, and product