Product Name: Iron Oxide Blue 886
Color Index: Pigment Blue 886
C.I. No.: 77491
CAS No.:2013-53-5
EINECS NO.:215-168-2  
Molecular Formula: Fe3O4
Molecular Weight: 159.69Iron Oxide Blue 886 PropertiesEMPEROR Iron Oxide Blue 886 is a common iron oxide pigment used in developing building materials, paints, rubber, asphalt, sports racetracks, paper, plastic and others. Offering excellent light and temperature resistance, Iron Oxide Blue 886 also offers strong color strength and good dispersion.Technical Data Sheet

Iron Oxide Blue 886
Density(g/cm3)	4.9-5.1
Appearance	Blue powder
Content of Fe3O4 %	90 min
PH Value	6.0min
Oil Absorption	25-35
Residue on 320 mesh,%	0.3 max
Water soluble, %	2.0 max
Volatile at 105 degree	1.0 max
Tinting strength, %	98-102

Note: the data contained here are based on our current knowledge and experience. It is the responsibility of user to test our products before the final application.

EMPEROR OXIDE BLUE for COATING COLORS:

Iron oxide blue is blue color, Its characterize as

• Strong tighting strength
• High hiding ability
• Easy dispersion
• Good light fastness
• Weather fastness

Advantage of " EMPEROR" iron oxide blue on Paint industry:

as iron oxide blue excellent on acid and alkali resistant used on coating industry, also low cost, it will widely used on exterior paint and primer. after years of development, we have just one grade which is blue iron oxide 886.

Direction for used on coating industry:

• 1: the iron oxide suitable for the coloring and protection of all kinds of paints and coatings. Such as alkyd resins, amino alkyd, vinyl chloride resin, polyurethane, nitro, polyester paint. In addition, also applies to the electrophoretic paint. Primer, enamel, pencil paint, mixed paint, baking, anti-rust paint, floor paint waterline paint. It can be used for water based coatings, powder coatings and plastic coatings. and paint used in toys, decorative paint, furniture paint, house paint, paint the garage, parking lot paint, automobile paint, and so on.
• 2: Usage method: Generally divided into three steps: wetting, grinding and dispersion (paint). Iron oxide pigments and paints, fillers for ingredient mixing tank, dubbed coarse paste, depending on the amount of solvent added to the viscosity of the resulting employ different milling equipment, such as mastics available triple roll mill fine, thin pulp available efficient sand mill (vertical or horizontal) or a ball mill. Primer is generally about 50 microns, about 40 microns finish requirements, and then in the paint tank, add resin, drier, solvent to dispersion(paint), coloring, adjust the viscosity, and finally Filtered, and product packaging.