Product Main

Quick Details

Model Number: MDS131
Brand Name: LIFENG
Place of Origin: China (Mainland)

Specifications

Product Description
Sludge Dewatering Machine Introduction

Multi-Disk Screw Press ( Hereinafter referred as MDS ) belongs to the screw press, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction. MDS using screw and the moving rings to clean itself as clog-free structure, and controlled by the PLC automatically, it's a new technology that can replace the traditional filter press like belt press and frame press, the screw speed is very low, so it cost low power and water consumption in contrast to the centrifuge, it is a cutting edge sludge dewatering machine.

MDS131 sludge dewatering machine 
Procedure of dewatering machine

 1. The sludge are transported to the flocculation tank through storage tank, and adequately mixed by the mixer.
2. After big flocs are formed, the sewage is transported to the MDS screw press.
4. Flocs moves from the thickening zone to the dewatering zone.
5. Gaps between moving rings and fixed rings narrows, and the pressure of the end plate increases dewatering,
finally the sludge cake is discharged.

5. The sludge is transported out by shaftless screw conveyor.

MDS131 sludge dewatering machine
Main Features
1) Exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l to 50000mg/l
2) Fixed and moving rings replace filter cloth, slelf-cleaning , clog-free, easy to handle oily sludge
3) Low running speed, low noise ,low power consumption, 1/8 of Belt press and 1/20 of Centrifuge
4) Less capital construction cost,excellent working performance
5) Fully automatic control, easy operation, simple maintenance