Skype firealarm87  /wechat 15220176087
1.SPECIFICATIONS
Operating Voltage Range: 18 ~ 30Vdc
Standby Current: 25mA
Alarm Current: 35mA
Detection Angle: 90
Detection Distance: 25m
Relay Contact Load: 3A@30Vdc
Operating Temperature Range: -10C-55C
Operating Humidity Range: 0 ~ 95%RH
Explosion Proof: EXdCT6 GB
Ingress Protection: IP66
Product Size:  91X100mm
Installation Dimension: 35mmX47mm
2.General
Working parameters
Project specifications or status
Power supply Minimum standard maximum: 18VDC- 30VDC
the current monitoring status of less than 15mA, the alarm state is less than or equal to 35mA
Pre heating time 60s
3.Fire alarm
When a flame is detected in the monitored area, the detector enters the fire alarm;
Fire alarm relay, red fire alarm light;
4.Fault alarm
When the sensor, power supply and other anomalies, the detector into the fault alarm state;
Fault output relay action, yellow fault indicator light;
When fire alarm and fault occur simultaneously, fire alarm is preferred;
5.Alarm threshold
1-5 adjustable (factory set to level 3)
Monitor state each time the green light flashes the alarm threshold
Alarm delay 0-30S adjustable (factory set to 0S) Drift compensation
Sensor hardware compensation and intelligent software compensation
Can effectively compensate for temperature, environmental changes and components of the long-term work of drift
Interference source suppression
Can effectively inhibit the impact of non flame interference sources, such as sunlight (direct and reflection), commonly used artificial light source,
Background radiation source, moving object, electric welding, etc.
6.Indicator light
Monitor status: green light Fire status: red light is always bright
Fault status: yellow light often bright Output
Fire alarm, alarm action, output contact 1A@30VDC 1A@250VAC
Fault relay, fault action, output contact 1A@30VDC 1A@250VAC