| Chemical Composition: | mgcl2 anhydrous, potassium, Caf2 |
|---|---|
| Dimensions: | 1-3mm |
| Shape: | offwhite granular |
| Application: | purify the motlen aluminium |
| Brand Name: | SATA |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
M-series Granule Fused Fluxes
General Introduction:
1. M-series do not contain various forms of Na, which is suitable for Mg>2% al-alloy to avoid " sodium brittle"
2. the main components are Chloride and Fluoride salts with other salts and compounds.
3. the dry raw materials are mixed together and then are fused or melted into a liquid state by using a high temperature furnace. after fusing completed the flux are cooled and they are crushed or ground into customized particle size.
4. Removes non-metallic inclusions, hydrogen, sodium, calcium and lithium from liquid aluminium and aluminium alloy. Enhances Degassing when injected flux with Argon or Nitrogen.
5.by means of flux injection Machine gives the highest refining efficiency.
6.Sodium levels less than 1ppm in high Mg-al alloys are attainable in the casting.
Advantage:
1) Ecofriendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies
2) Uniform size, reacts fully. Purify the melt improve melt quality.
3) Increases the extrusion speed and die life when extruding profiles
4) Reduces the number of breaks in continuous casting
5) Eliminates edge cracks when rolling high Mg aluminium alloys
6) Free of fluorides. Zero fluoride emissions.
7) Low melting point for rapid dispersion
General Introduction:
1. M-series do not contain various forms of Na, which is suitable for Mg>2% al-alloy to avoid " sodium brittle"
2. the main components are Chloride and Fluoride salts with other salts and compounds.
3. the dry raw materials are mixed together and then are fused or melted into a liquid state by using a high temperature furnace. after fusing completed the flux are cooled and they are crushed or ground into customized particle size.
4. Removes non-metallic inclusions, hydrogen, sodium, calcium and lithium from liquid aluminium and aluminium alloy. Enhances Degassing when injected flux with Argon or Nitrogen.
5.by means of flux injection Machine gives the highest refining efficiency.
6.Sodium levels less than 1ppm in high Mg-al alloys are attainable in the casting.
Advantage:
1) Ecofriendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies
2) Uniform size, reacts fully. Purify the melt improve melt quality.
3) Increases the extrusion speed and die life when extruding profiles
4) Reduces the number of breaks in continuous casting
5) Eliminates edge cracks when rolling high Mg aluminium alloys
6) Free of fluorides. Zero fluoride emissions.
7) Low melting point for rapid dispersion