| Classification: | Laboratory Heating Equipments |
|---|---|
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Main fearures:
1. Furnace chamber is made of high purity Al2O3 ceramic fiber materials, no powder dropping off under high temperature, low heat capacity, and high efficiency of energy saving.
2. Double-layer body structure, lower external temperature.
3. Heating element is good-quality Silicon Carbide rod properties of which are stable, and can provide long life.
4. Microcomputer PID control module enables precise temperature control and constant temperature requirements.
5. Temperature contrOller with 2 groups/16 segments programmable, and avaiable to set temperature curve.
6. over temperature alarm: wheN temperature exceeds the limit value, machine will send out light-sound signal and stop heating.
Specifications:
Optional components:
1. A large screen paperless recorder, to achieve real-time temperature curve recorded with a memory card of experimental data analysis and printing.
2. Installation of an air intake, which can feed into air and inert gas. An exhaust chimney connecting stainless steel bellows, so that the generate toxic gas emissions to a specified location.
Reference picture:
1. Furnace chamber is made of high purity Al2O3 ceramic fiber materials, no powder dropping off under high temperature, low heat capacity, and high efficiency of energy saving.
2. Double-layer body structure, lower external temperature.
3. Heating element is good-quality Silicon Carbide rod properties of which are stable, and can provide long life.
4. Microcomputer PID control module enables precise temperature control and constant temperature requirements.
5. Temperature contrOller with 2 groups/16 segments programmable, and avaiable to set temperature curve.
6. over temperature alarm: wheN temperature exceeds the limit value, machine will send out light-sound signal and stop heating.
Specifications:
| Chamber Size |
250(W)*300(L)*250(H)mm Capacity: 18 liters |
| Max. Temperature |
1400c |
Continuous Operating
Max. Temperature |
1350c |
| Heating Rate | 0~30 c/min |
| Heating Element |
SiC rod |
| Temperature Control |
SCR controller and PID parameter self-setting |
| Display Accuracy | ±1 deg.C |
| Voltage |
AC 380V 3 phase |
| Power |
6 kw |
| Thermocouple | S type |
Standard Accessory |
High temperature gloves 1 pair, crucible tong 1pc |
Optional components:
1. A large screen paperless recorder, to achieve real-time temperature curve recorded with a memory card of experimental data analysis and printing.
2. Installation of an air intake, which can feed into air and inert gas. An exhaust chimney connecting stainless steel bellows, so that the generate toxic gas emissions to a specified location.
Reference picture:
