| Item Type: | High Mast Lights |
|---|---|
| Model Number: | GS-LI/B |
| Brand Name: | Green Source |
| Place of Origin: | China (Mainland) |
| Base Type: | 2G11 |
| IP Rating: | IP65 |
| Lamp Body Material: | Aluminum |
| Working Lifetime(Hour): | 24 |
| Working Temperature(℃): | |
| Lamp Power(W): | 3 |
| Input Voltage(V): | 220 |
| Light Source: | Induction Lamps |
Quick Details
Specifications
Description
GS-LI/B Low-intensity Single Aviation Obstruction Light,Base with high intensity aviation aluminum casting, fUlly sealed structure; Light source adopt with independent research and development dedicated LED chip, Which have the specific ofHigh light intensity,Low power consumption and longService life; Lampshade adopt with PC material, It can resist corrosion, Anti-UV, Anti-shock; Management circuit withsTrong lightning protection andwIth the surge protection device, Which can adopt to extremely bad working environment. this lamp withPhotoswitch, It can turn on when light intensity less than 50LUX, and turn off when above 50Lux.
Specification Parameter FAA Classify L-810 Type GS-LI/B PowerSupply Optional voltage:AC220V,AC120V,DC12V,DC24V,DC48V SupplyFRequency 50HZ～60HZ Power COnsumption ≤3W WorkingMode 20times/min LightINtensity TypeB ≥32.5cd TypeA≥10CD HorizontalOUt-put 360° VerticalDIvergence 10° LightSOurceSErvice Life ≥20 years EmittingColor Red OverallSize InstallationSize 3/4Inches or1 inch Chassis install IPPRotection IP65 OpticalAmbient BRightness 50/100Lux AmbientTEmperature -40℃～70℃ Weight 1kg Anti-windABility 120m/s
Function&Features
Adopts Fresnel lens PC lAmp shade,Converging angle meets FAA standard
with automatically light control function that can change to working mode at rainy day and night.
LEDLight source, its service life can up to 100000hours.
Low voltage design, high safety degree for using.
with the impact resistance, anti lightning, resistant to sunlight, anti snow, can resist typhoons, hail and other severe weather
with over-current protection function.
Possess lightning protection function.
It can be added warning function at dry contact.
It contains switch for changing flashing light and steady light.
No radio frequency (RF), no electromagnetic interference.
Usage notice
Don't use any out of nominal voltage,oTherwiseWill destroy the equipment.
Do not open it if theDevice is out of operation,in order not to be hurt bythe internal high pressure.
after finished theInstallation, the personnel must check whether theDevice is in a good waterproof processing and whether thescrew spikes aretightened.
Non-professional workerscan not do the Device maintenance, in order not toExpand the error and be hurt.
Application
Block
Airport
Highmast lamp
Chimney
Bridge
IRon tower
Telecomtowers
High-rise buIlding