Eries Pleated Filter Cartridge is constructed of superfine PP(polypropylene) and imported woven or mesh support materials, providing Micron rating from 0.1m to 60m. Has high and Stable filtration efficiency, can be used for various demanding filtering Environment.

PLZ Series Pleated Filter Cartridge is divided into PLZ-(general frame) and PLZ-(integral frame). the PLZ- with integral Frame, has big filtration area, long life, high strength, dimensional Stability, small leakage risk, etc.

Application:

*General Purpose: RO Prefiltration, all kinds process water purification;

*Industrial: Water pretreatment of power plant, deionized water pre-filtration, and Filtration of plating *solution

*Food and Beverage: Alcohol, Beverage, Pure water.

*Chemical / petrochemical: Filtration of various acids, alkalis, solvents and kinds of Chemicals;

*Biopharmaceutical: Filtration of pharmaceutical, biotechnology and plasma products.

Featuresand Benefits:

;

2. Depth Pleated membrane, Can meet various application Areas;

3. Graded pore density provide high dirt holding Capacity;

4. Common Cleaning methods available, or use high-pressure disinfection cabinet and steam Sterilization;

5. Absolute Rating, bubble point test compliance with GMP Certification;

Specifications

Item	Technical Parameters
Micron(m )	0.1, 0.22, 0.45, 1, 2, 3, 5, 10, 20, 30, 60
FIltration Area	0.4-0.7m
Outside diameter	68.5mm
MaximumoPeratingDifferential pRessure	P0.35MPa at25
Maximum operating Differential pressure (reverse Direction)	P0.28MPa at60
Maximum Operating temperature	80(Stainless Steel support is recommended for temperature exceeds 50)
Sterilization temperature	30 minute cycles @121
Water flow rate	Please refer to " Rating Curve"
Chemical compatibility	Please refer to "the chemical compatibility Table"

Material structure

Filter Media	Polypropylene
Support/Drainage	Polypropylene
Core/Cage/End Cap	Polypropylene
Seals	Please Refer to " Ordering Information"

Maximum oPerating temperature	80
Maximum operating pressure	4bar/21
	2.4bar/80
Mosit-heat sterilization	121/30min
Flowing hot water sterilization	85/30min

	Technical Parameters
Micron(m )	, 20, 30, 60
FIltration Area	0.4-0.7m
Filter Media	Polypropylene
Support/Drainage	Polypropylene
Core/Cage/End Cap	Polypropylene
Outside diameter	68.5mm
MaximumoPeratingDifferential PRessure	P0.35MPa at25
Maximum operating Differential pressure (reverse Direction)	P0.28MPa at60
Maximum Operating temperature	80(Stainless Steel support is recommended for temperature exceeds 50)
Sterilization temperature	30 minute cycles @121
Maximum operating pressure	4bar/21