Application

Snap Tester (Button Pull Tester), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available).

 

Our snap tester consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester which allows fine control with convenient operation.

 

the snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. by turning the hand wheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded. the capability of the snap tester can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others.

 

Included Accessories

1 Lower Fabric Clamp, Lever Armlocking

1 Upper Stud Clamp

1 Upper Snap Clamp

1 Three Pronged Clamp

1 Two Pronged Clamp with screw

1 Lower Grasp Button Kit

1 Long Nose Vice Grip

1 Safety Goggles

5 Rubber Rings

1 Operation Manual

 

OPtionalAccessories

1 SUNDOO Force Gauge (300N, Resolution 2N, Accuracy +/-1%FS)

 

Standards: ASTM PS79-96, ASTM F963, EN 71-1, 16 CFR 1500.51-53, M&S P115A

Weight: 45 Kg

Dimensions: 230x280x750mm (LxWxH)