| Output Current: | 2.5A |
|---|---|
| Output Frequency: | 50/60 Hz |
| Output Voltage: | 12VDC |
| Input Voltage: | 100-265V |
| Output Type: | Single |
| Model Number: | VUF-030-012A5-D |
| Brand Name: | Hualiang |
| Place of Origin: | China (Mainland) |
| Power factor: | 0.95 |
| Dimming mode: | 0/1-10Vdc, PWM Resistance |
| Protection: | OCP,OVP,SCP-Auto Recovery |
| Withstand Voltage: | 3750V |
| Dimming range of voltage: | 5.5-12V |
| Dimension: | 257*30*20mm |
| Weight: | 300g Typical |
| Output power: | 30W |
| Efficiency: | 80% |
| Operation: | -30~+50 Tc:+80 |
Quick Details
Specifications
Hualiang 30W 12VLED dimmable driver 0-10V power supply dimmable type waterproof PMW or Resistance signal
| MODEL | VUF-030-012A5-D | ||||
| OUTPUT | DC VOLTAGE | 12V | |||
| RATED CURRENT | 2.5A | ||||
| VOLTAGE RANGE | 6.5-12V | ||||
| RATED POWER | 30W | ||||
| RIPPLE&NOISE(max) | <2V | ||||
| VOLTAGE TOLERANCE | ±0.5V | ||||
| INPUT | VOLTAGE RANGE | 100-265VAC | |||
| FREQUENCY RANGE | 47-63Hz | ||||
| POWER FACTOR(Typ.) | ≥0.95 | ||||
| EFFICIENCY(Typ.) | 80% | ||||
| AC CURRENT(Typ.) | 0.17A/220VAC | ||||
| PROTECTION | Short circuit | Protection type:Hiccpe mode,recovers automatically after condition is removed | |||
| Overload | 100-108% | ||||
| ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
| INGRESS PROTECTION | IP67 design for indoor or outdoor installations | ||||
| STORAGE TEMP | -40~+80℃ | ||||
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP67 approved | |||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
| EMC Test Standards | EN55015;EN61000-3-2;EN61000-3-3 | ||||
| EN61547 | |||||
| DIMMABLE | Three in one dimming function(0/1-10Vdcor resistance) | ||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 220VAC input,rated load and 25℃ of ambient temperature. | ||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel | |||||
| capacitor. | |||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||||
