| Output Current: | 5A |
|---|---|
| Output Frequency: | 50/60Hz |
| Output Voltage: | 12V |
| Input Voltage: | 100-265VAC |
| Output Type: | Single |
| Output Power: | 60W |
| Model Number: | VUF-060-012E1-D |
| Brand Name: | Hualiang |
| Place of Origin: | China (Mainland) |
| Power factor: | 0.95 |
| Dimming mode: | 0/1-10Vdc, PWM, Resistance |
| Protection: | OCP,OVP,SCP-Auto Recovery |
| Operation temp: | -30~+50 Tc:+80 |
| Dimming range of voltage: | 6.5-12V |
| Dimension: | 194*68.6*42mm |
| Weight: | 900g Typical |
| Withstand voltage: | 3750V |
| Output power: | 60W |
| Efficiency: | 83% |
Quick Details
Specifications
Hualiang 60W 12VLED dimmable driver 0-10V PMW or Resistance signal power supply
| MODEL | VUF-060-012E1-D | ||||
| OUTPUT | DC VOLTAGE | 12V | |||
| RATED CURRENT | 5A | ||||
| VOLTAGE RANGE | 6.5-12V | ||||
| RATED POWER | 60W | ||||
| RIPPLE&NOISE(max) | <1.5V | ||||
| VOLTAGE TOLERANCE | ±0.5V | ||||
| INPUT | VOLTAGE RANGE | 100-265VAC | |||
| FREQUENCY RANGE | 47-63Hz | ||||
| POWER FACTOR(Typ.) | ≥0.92 | ||||
| EFFICIENCY(Typ.) | 83% | ||||
| AC CURRENT(Typ.) | 0.34A/220VAC | ||||
| PROTECTION | Short circuit | Protection type:Hiccpe mode,recovers automatically after condition is removed | |||
| Overload | 100-120% | ||||
| ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
| INGRESS PROTECTION | IP67 design for indoor or outdoor installations | ||||
| STORAGE TEMP | -40~+80℃ | ||||
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP67 approved | |||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
| EMC Test Standards | EN55015;EN61000-3-2;EN61000-3-3 | ||||
| EN61547 | |||||
| DIMMABLE | Three in one dimming function(0/1-10Vdcor resistance) | ||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 220VAC input,rated load and 25℃ of ambient temperature. | ||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel | |||||
| capacitor. | |||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||||

