Features:

 

1.the volute select the high quality cold rolling steel plate either the pot galvanize steel plate knee bend weld the system or use nip the shape of the mouth type manufacture. Its line is the logarithmic spiral curve; the lift-drag ratio is good.

 

2.the air blower air outlet may 0°, 90°, 180°, 270° four kind of position installments, like the following chart.

 

3. Before the impeller central disk, side the plate, the curved circular arc leaf blade is the ramming formation, the impeller assembly uses rolls the rivet. the impeller transient equilibrium quality rank is the G5.6 level.

 

4.the main axle use the high quality carbon steel to make and to pass through the quenching and tempering, phosphorization rust prevention processing, the safety performance is good.

 

5. the inlet use the high quality steel plate after the spinning formation, guaranteed that the air enters the impeller to import the section evenly, reduces the flowing to lose greatly, raises impeller's efficiency.

 

 6.the air blower uses outside parts of rotor low noise three-phase asynchronous motor. this electrical machinery has the axis to be fixed, outer covering revolving characteristic. the impeller installs in the electrical machinery outer covering, revolves the direct drive by the electrical machinery outer covering. this electrical machinery may use the three-phase pressure regulator; the controllable fine jade pressure regulator, the frequency changer,the stepless speed regulation and so on methods, adapts the system load changeable request.

 

 Product Specification and Technique Parameter:

Model No.	Technique parameter					Model No.	Technique parameter
	Air Flow (m3/h)	Pressure PA	Noise scopedB)	Power KW			Air Flow (m3/h)	Pressure PA	Entire pressure scopedB)	Power KW
TRW-225	1000-4000	200-800	62-64	2		TRW-630	4500-30000	150-2000	68-71.5	11
TRW-250	1500-6000	200-1000	61.5-64.5	2.2		TRW-710	5000-40000	200-2000	77-77.98	15
TRW-280	1800-8000	200-1500	63-66	3		TRW-800	6000-50000	100-2000	76-78.5	18.5
TRW-315	2000-10000	200-1600	66-68.5	4		TRW-900	10000-80000	100-20000	78-78.5	22
TRW-355	2500-12000	200-1700	67.5-70	5.5		TRW-1000	10000-100000	100-2000	72-73	25
TRW-400	3000-14000	200-1800	68.5-69.5	6
TRW-450	3500-160000	200-1900	70.5-72	6
TRW-500	4000-20000	200-2000	66.5-68.5	7.5
TRW-	3300-5200	409-440	69-71	1.1

Our Services

 

1.   Warranty: 1 Year warranty for all products.

2.   Products Quality: 100% products inspection before delivery.

3.   Just in time delivery: Normally, lead time is 10-15 days.

4.   Customized Service: as we have our own molding department, customized service can be provided.

5.   Prompt Customers Service: TradeManager,Skype or E-mail will be replied in 24 hours.