Application

Fabric Pneumatic Bursting Tester, to determine the bursting pressure of fabrics uses pneumatic test method, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made fabric

 

A test specimen is clamped over an expansive diaphragm by a circular clamping ring, increasing compressed air pressure is applied to the underside of the diaphragm, causing distension of the fabric until the test specimen bursts, the bursting strength and distension are determined.

 

Real time Testing-curve is shown on the Bursting software. the machine can also be controlled easily by the graphics touch-screen without additional computer.

Specifications/Features  

Computer & Special software controlled, automatic clamping and burst test, automatic calibration, automatic data processing and test report output

It can be controlled by its easy to use graphics touch-screen instead of computer

Bursting pressure up to 1200KPa, accuracy ≤ ±0.2%F?S

Burst distension up to 70mm

Equipped with lamp for clear observation

Transparent acrylic cover ensures safe operation

4 most commonly used test areas are available and be easily shifted

Test area: 100, 50, 10, 7.3 cm2 (112.8, 79.8, 35.7, 30.5 mm Dia.)

Standards: ISO 13938-2, ASTM D3786, IWS TM29, BS-2922, FZ/T 60019, FZ/T 01030, JIS L 1018.6.17, AS2001.2.4, GB/T 7742

Power/Air: 220/110V   50/60Hz   0.4~0.7MPa

Weight: 180 Kg

Dimensions: 560x450x580mm (LxWxH)