SALT SPRAY TEST CHAMBER

GENERAL INTRODUCTION---SALT SPRAY TEST CHAMBER

Designed with automatic/manual water filling system in case of water shortage;

Digital display temperature control method with PID control of accuracy at 0.1 degree;

Double over-temperature protection system & water-shortage alerting system;

Salt sprat test chamber is designed with direct,stable vapor heating method;

Precise glass sprayer with adjustable frog flow to assure uniform distribution.

FUNCTIONAL FEATURES---SALT SPRAY TEST CHAMBER

8MM Impact-Resistance Steel Testing Chamber with 5MM Transparent Acrylic Chamber Cover & Constant Temperature Water Sink
with Automatic Water Level Controller; 

SUS#304 Stainless Steel Plate Saturated Air Tank with Its Thickness of 2MM Is Designed with Automatic Water Level Controller To
Refill Water in Water Shortage;

Salt Spray System Is Designed with Cone Frog Dispenser to Guarantee A Uniform Distribution of Adjustable Spray Flow by Continuous
& Programmable Spraying Method;

Control System Employs Digital Temperature Controller with PID Control loop & SSR Output Works with High-Stability Temperaure
Sensor to Regulate Salt Spraying Temperature at an Accuracy of 1 degree;

Salt Solution Refilling Tank Designed with Hidden Water Level Meter while Salt Spray Testing Chamber Designed as Flexible &
Adjustable Angle at 15 or 30; 

TECHNICAL PARAMETERS--SALT SPRAY TEST CHAMBER

Tester Model	LTSP-600	LTSP-900	LTSP-1200	LTSP-1600	LTSP2000
Internal Dimension LWH mm	600x450x400	900x600x500	1200x1000x500	1600x1000x500	2000x1200x600
External Dimension LWH mm	1070x600x1180	1410x880x1280	1900x1300x1400	2300x1300x1400	2700x150x1500
Test Zone Volume  L	108	270	600	800	1440
Water Consumption L	15	25	40	40	40
Power Input KW	1.3	1.5	4	5	6.5
Current  A	10	15	30	30	30
Test Zone Temp. Range	NSS.ACSS 35 Celsius 1 Celsius/ CASS 50 Celsius 1Celsius
Saturated Barrel Temp. Range	NSS.ACSS 47 Celsius 1 Celsius/ CASS 63 Celsius 1 Celsius
Temp. Fluctuation	B0.5 Celsius
Temp. Distribution	B2.0 Celsius
Salt Mist Sedimentation Rate	1-2ml/80cm .H    An average value should be taken after 16 hours' operation
Power Input	AC 220V, 50HZ,Single Phase		AC 220V, 50HZ,Single Phase/380V, 3 Phase,50Hz
Spray Method	Continuous or Programmable