|Place of Origin:||China (Mainland)|
|Name:||High Speed Gate|
|Material:||SUS304 Stainless Steel|
|Open Direction:||Single Direction/Bi-Direction|
|Application:||Access Control System|
Bridge Type Access Control System for Entrance, High Speed Barrier Gate
1.High Barrier gate are compact and cost-effective entrance
2.the body is made of brushed stainless steel which is robust, Rigid, anti-rust and durable.
3.High Barrier gate is ideal for indoor and outdoor settings.
4.It can be integrated with any kind of access controller system (e.g.: RFID device, Push button, Fingerprint and Biometric device).
Case of emergency, the Swing Barrier gate will drop down When power off.
7.It is suitable for all kinds of places
1.Fault self-test and alarm functions,convenient user maintenance and using
2.Via the control board Built in a small dish,Programmable devices running status
3.Anti-Pinch mechanical structure,anti-bumps function, when the swing arm reset process meet resistance, within a limited time automatically stops the motor, the default delay after the reset again (until reset), and the force is very small (≤2Kg )
4.Break into protection function, when the gate signal is not received, the arm automatically locked
5.Relative with a variety of reader device attached,working when receive relay switch signal
6.Remote control and management by the management computer
7.Power-off arm Automatic open,turn on automatically closed, can meet fire safety requirements
8.Pinch function (bridge type four pairs of infrared optional)
9.Accurate logic judgment and infrared reset function (4 or 6 pairs of infrared)
10.Counting function (optional)
AC220 ±10% V/50 ±10% HZ
50person/minute(always open),35-40person/minute(always close)
Unidirectional or bidirectional
Dry contact signal or 12v DC level or 12v pulse≥100ms,drive current≥10mA
Length of the bar
≤300mm, Standard bar length 260MM
Continuous Opening and Closing OperationMore Than 3 million times
Product Application and cases show: