Description

HarshMet HSA-72 isA general-purpose insulating, self-amalgamating tape based on PIB (Polyisobutylene) rubber. Its colour is black..

 

Sizes

38.1mm×4.57m×0.76mm

19mm×10m×0.51mm

 

Applications

Product properties and correct application ensure waterproof connections (for fresh and sea water) in a wide range of temperatures.

for jointing and repairing a wide range of power and distribution cables up to10 kV.

for making watertight seals at polyethylene sleeve joints on polyethylene-sleeved telephone cables both above and below ground.

for protection against corrosion at welds and joints and for the waterproofing of many electrical components.

for general-purpose protection and waterproofinG of telecommunications cables.

for insulation, waterproofing and protection of electrical components.

for corrosion protection of metal pipework.

for protection of joints against seawater in marine environments.

for general-purpose DIY temporary repairs.

for waterproofing and protecting cables and components on satellite dishes.

Technical Data

Properties	Typical Value	Test Method
Thickness	0.76mm	ASTM D 4325
Tensile Strength	1.9MPa	ASTM D 4325
Elongation at break	800%	ASTM D 4325
Fusion	Pass	ASTM D4325
Ozone Resistance	Pass	ASTM D 4325
UV Resistance	Pass	ASTM D 4325
Dielectric Strength	33KV/mm	ASTM D149:64
Dielectric Constant	2.8	ASTM D 150:74
Heat ageing (130℃ 168H)	Pass	ASTM 4388
Ozone ageing	Pass	ASTM 4325
UV Ageing	Pass	ASTM 4325
Xenon ageing	Pass	ISO 4892-2

 

Notes:

Data in table represent average of test results and are not to be used for specification purposes.
the product user should make their own tests to determine the product's suitability for their intended use.