TWO ZONE THERMAL SHOCK TEST CHAMBER

FUNCTIONAL FEATURES---TWO ZONE THERMAL SHOCK TEST CHAMBER

External test chamber is made of dual electrostatic SUS #304 with high temperature resistance as well as galvanized plate as well as
Internal test chamber is also made of SUS#304 stainless steel plate;

Test Chamber door is designed as single open door and the cable port with different size such as 50mm,80mm,100mm for
Cable through-hole with silicon plug and stainless steel cover; 

the test specimen is design as a mobile basket type to move up and down and with features such as replace shift time less than 10s,
and maximum basket loading capacity as 20kg, automatic locking function on test specimen loaded inside of basket as well as
Automatic shutdown of basket if test chamber door opened; 

Door Frame & Insulation Door Employs high reliable silicon sealing ring & strips, ensure a close test environment thus to provide an
Excellent test condition for entire test procedure; 

the Heating system is introduced with electrical Heating Tube with fin-shape nichorome heating tube with over-temperature
Protection functions; the control output signal through SSR relay to control heater current to achieve high-accuracy temperature
Control;

Air Supply System is designed with an method of air blow from chamber right side to left side and air cycling driven by cycling
Motor to guarantee proper temperature and humidity uniformity;  multiple-blade centrifugal cycling blower is introduced with
High-low temperature resistance blades;

Essential mechanism and subsystems for test chamber such as French Tecumseh /German Bitzer/Copeland Compressor,
Environmental friendly refrigerant HFC R404A,R23A;

Control System is introduced with control method of Taiwan TATO TT-5166 TH-7 Industrial microcomputer control system with
Anti-windup PID, BTC controlling unit as well as available software for customization; integrated with sampling module of 24 bit AD
Converting module to achieve automatic calibration and high accurate control.

Protective System is designed as below to ensure entire test chamber in safe operation condition; 

over-temperature for test specimen protection function with independent regulation of temperature protector; introduced with
Non-fuse protective switch; over-temperature for heater protective switch; over-load for compressor protective function, high/low
Pressure for compressor protection function; over-current protection system.

TECHNICAL PARAMETERS---TWO ZONE THERMAL SHOCK TEST CHAMBER

WHD mm	350400360	400500400	500600500	600700600	800800800	100010001000
External Dimension WHDmm	128019201160	132020001520	150021001700	160022001900	180023002100	200025502300
Testing Zone Temp.Range	Type A: -40~+150Degree C  200 degree C  Customize;Type B: -55~+150 degree C  200degree C Customize  ;Type C: -65~+150degree C
	High Temp. Range of Testing Zone: +60~+150Degree C   200Degree C  customize; Low Temp. of Testing Zone: -10~-40Degree C /-55Degree C /-65Degree C
High Low Temp. Exposure Time	Exposure to High Temp.: +60Degree C ~+150Degree C    200Degree C  customize   30mins
	Exposure to High Temp.: -10Degree C ~Type A -40Degree C  /Type B -55Degree C /Type C -65Degree C   30mins
Pre-Heat Zone Temp./Heating Time	RT~200Degree C /Approx 45 mins
Pre-cooling zone /cooling time	RT~-75Degree C /Approx 100 mins
Temp. Recovery Time/conversion Time	Less than 5min/5sec
Machine Material	Inner with SUS 304 Stainless steel, External with SUS304 Stainless steel or Cold-rolled powerder coated material.Insulation material with Polyurethane material.
Cooling System	Semi-hermetic double-stage compressor water-cooled type /Hermetic double-stage compressor air-cooled type
Protection System	Non-fuse breaker, high and low pressure protective switch of the compressor,refrigerator  high-pressure protective switch, failure warning system, electronic alarm
Accessories	Viewing window
Compressor	French 'Tecumseh'  Brand, Germany Bizer Brand
Power Source	AC220V 1ph  3 Wires,50/60HZ, AC380V 3ph  5 Wires,50/60HZ
Gross Weight	460	620	780	950	1280	1450
Compressor	French Tecumseh Brand, Germany Bizer Brand

STANDARD COMPLIANCE---TWO ZONE THERMAL SHOCK TEST CHAMBER

GB/T  2423.1-2001	Environmental testing - Part 2: Test methods - Tests A: Cold
GB/T  2423.2-2001	Environmental testing - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.22-2002	Basic environmental testing procedures for electric and electronic products--Test N: Change of temperature
GJB150.3A-2009	Test Method: High Temperature
GJB150.4A-2009	Test Method: Low Temperature
GJB/150.5-2009	Test Method: Temperature Shock