TOP UNIVERSAL LATHE CM6241 |
SPECIFICATION |
| Swing over bed |
410mm |
| Swing over cross slide |
255mm |
| Swing over bed in gap |
580mm |
| Center height |
205mm |
| Distance between centers: |
1000mm |
| Width of bed |
250mm |
| Spindle hole. |
52mm |
| Spindle nose fixture |
DIN 55029, D1 - 6 |
| Taper of spindle |
MT6 |
| Number of speeds |
16kinds |
| Speed range: |
| 45 to 70 - 90 - 108 to 140 - 165 - 215-330 - 255-385 - 510-585 - 770-900 - 1170 - 1800. |
| English threading |
2 to 72 TPI. (45 kinds) |
| Metric threading |
0.2 to 14 mm. (39 kinds) |
| Longitudinal inch feed : 0.002 "to 0.067" per revolution. (17kinds ) |
| Long Metric feed 0.05 to 1.7 mm per revolution. (17 kinds ) |
| Cross metric feed 0.025-0.85mm/rev(17 kinds) |
| Modular range |
0.3 to 3.5 MP. (18 kinds ) |
| Diameter range: |
8 to 44 DP. (21kinds ) |
| Type tool post: 4 Way tool post. |
|
| Maximum tool diameter in the appropriate container: |
20 x 20 mm. |
| Maximum displacement of the support cone |
140 mm. |
| Maximum displacement of the lateral support |
210 mm. |
| Overhang of the quill |
120mm. |
| Diameter of quill |
50 mm. |
| Taper of tailstock sleeve |
MT4 |
| Packing Dimensions: |
205 x 95 x 160 cm. |
| Motor |
2.2KW / 3.3 KW. (2 speeds 400 volts.) |
| Weight: Approx. |
1350 KG |
