JNJX-III(E) Type Polyurethane High-pressure Foaming Equipment

 

JNJX-III(E) Type has a wide scope of applications.

Insulation & Coating: external wall insulation, internal wall insulation, roof, cold storage, ship cabin, cargo containers,trucks, refrigerated trucks,tank, etc.

2.Casting: solar water heaters,tank insulation, cabin, insulation board, security doors, refrigerators, pipes, road construction, packaging, road construction, wall insulation, etc.

Portable high-pressure Polyurethane Foaming Machine 

1. Pneumatic supercharging device, making the enough power for AB material mix;

2. Adopting the most advanced ventilation method, guaranteeing equipment working stability to the maximum;

3. Minimizing spraying congestion with multi-feedstock device;

4. Multi-leakage protection system to protect the safety of the operator;

5. Main machine is equipped with emergency switch system, helping operator deal with emergencies rapidly;

6. Great heating system enables rapid warming of raw materials to the best state, speeding up normal operation progress;

7. Humanized design for equipment operation panel, super easy to get the hang of it;

8. the latest spraying gun is air-cleaning, light-weighted,  as well as with low failure rate,;

9. Lifting pump adopts big change ratio method, in the winter operator also can easily feed raw materials with high viscosity;

Technical Parameters:

Power source: single-phase220V 50Hz     Heating power:7.5KW

Driven mode:Pneumatic                 Air source:0.5~0.8 MPa ≥0.9m3/min

Raw output:2~12 kg/min                Maximum output pressure: 11Mpa

AB material output ratio: AB 1:1

● Packing Size: 850mm X 850mm X 1550mm         Machine Weight:109kg