Kelilong Water's pH Controllers are packaged in a 1/4
DIN panel mount controller box with dual SPDT Hi/Lo
Relays, manual set points and calibration potentiometers
Set into the front of the pH controller panel. the pH
Controllers feature an isolated 4-20 mA current output.
the pH Controllers require a Pt-100 ATC probe or a
Simulation resistor for temperature compensation.
Kelilong Water's pH Controllers are packaged in a 1/4
DIN panel mount controller box with dual SPDT Hi/Lo
Relays, manual set points and calibration potentiometers
Set into the front of the pH controller panel. the pH
Controllers feature an isolated 4-20 mA current output.
the pH Controllers require a Pt-100 ATC probe or a
Simulation resistor for temperature compensation.
DIN panel mount controller box with dual SPDT Hi/Lo
Relays, manual set points and calibration potentiometers
Set into the front of the pH controller panel. the pH
Controllers feature an isolated 4-20 mA current output.
the pH Controllers require a Pt-100 ATC probe or a
Simulation resistor for temperature compensation.
Kelilong Water's pH Controllers are packaged in a 1/4
DIN panel mount controller box with dual SPDT Hi/Lo
Relays, manual set points and calibration potentiometers
Set into the front of the pH controller panel. the pH
Controllers feature an isolated 4-20 mA current output.
the pH Controllers require a Pt-100 ATC probe or a
Simulation resistor for temperature compensation.
| Model | KL-018 |
| Measuring range | 0.00~14.00PH |
| Accuracy | ±0.02PH |
| Resolution | 0.01PH |
| Output current | 4-20mA |
| Automatic temperature compensation | 0~100℃ |
| Warning accuracy | ±0.02PH |
| Environment | Temperature:0~50℃ Humidity<95℅ |
| Display | 4-digital LED |
| Input Impedance | 1012Ω |
| Power Supply | 220V±10℅ 50Hz±2℅ |
| Dimensions | 96mm×96mm×160mm |
| Weight | 950g |