After-sales Service Provided: | Engineers available to service machinery overseas |
---|---|
Stitch Formation: | Lock Stitch |
Model Number: | MLK-342GXL |
Type: | Industrial Sewing Machine |
Condition: | New |
Quick Details
Specifications
FEATURES:
Set a double step clamp, clamp can be stop and suspended in the middle position, and then down to the lowest point. Can set up a suitable height in the middle position, can quickly and accurately positioning the material. this can be reduce the extra operation caused by the positioning error of the sewing matter, saving the total cycle time during sewing.
Remove the 4 screws to replaced clamp, also can be installed to the accurate position rapidly.
Cna fix on the bottom plate, tighten the bolts to complete the installation. Accurate positioning of plate can be conveniently fix up.
the sewing machine can be stored in the memory of large amounts of data (512 patterns, 500000 stitches). Every time you can change pattern without reloading the sewing pattern. In addition, the CF card (Compact Flash) flash memory card with to the storage media, read and write speed, large amounts of data can be copied or transferred to other sewing machine or electric copy or transfer to other sewing machine or computer fo data management.
SPECIFICATION
Stitch |
Single-Needle Flat Seam | |||
Sewing Speed |
2,700rmp | |||
Sewing Area X*Y |
130*100mm |
220*100mm |
300*200mm |
600*300mm |
Feeding Material Device |
Servo Motor | |||
Stitch Length |
0.05-12.7mm | |||
Save by Pin Code |
Internal Memory 500000 stitches | |||
Clamp drive |
Pneumatic | |||
Clamp Height |
30mm max | |||
Clamp Lowest |
One-piec pressure foot | |||
Pressure Foot Lift up |
22mm | |||
Pressure Foot Intermittent |
0.2-4.5mm or 4.5mm (standard setting 3mm) | |||
Hook |
Large Hook (standard) | |||
Thread wiper device |
Standard Equipment | |||
Trimmer Device |
Standard Equipment | |||
Data Memory |
Flash memory (can save in CF card) 3 inch disk 2HD/1.44BM.2DD | |||
Number of User Program |
50 | |||
Loop Program Number |
9 | |||
Motor |
750 W Servo Motor | |||
Weight |
178kg |
178kg |
180kg |
440kg |
Power |
220v/380v 500VA | |||
Air Pressure |
0.5Mpa 1.81/min |