QC12K serial Pendulum Shearing Machine

Machine Description

      the motor of backgauge can be equipped with AC servo motor. User may

 Choose CNC system brand. the shears blade movement is circular type, It is 

Difficult that make the circular Blade.  the material edge face is not very good, 

Because it is the arc motion, which can not be madeinto a rectangular blade, and 

Should be done acute angle, so the force is not an ideal situation blades, blade injuries 

Are more severe. but the pendulum shearing machine's  prices were relatively cheap, 

 If Cut below 10mm steel plate, you can consider using this machine.
the bed of shearing machine was welded by 16Mn carbon steel.the overall Welding
Structure by vibration aging treatment, have high machine rigidity, high Precision and
Good precision to maintaine.
     the shearing machine have double-action function of upper slider and lower pad.
the working stroke can be adjusted according to the technical requirements within  the 
Specified range.
      the up knife may stable rolling because of three-point supporting shaft close to the
Rectangle track.the blade bearing may move easily. It is easy that adjusting the blade gap
Uniformity, improve the cutting edge quality and extend the life of the blade.
     Tandem cylinder synchronization system make the machine force evenly, We Can easily
Adjust the shear angle to meet the needs of different shear plate thickness by adjusting the
Cylinder flow. the hydraulic system uses two-Way plug-in integrated Valve.
     the feeding plate length can be displayed out by digital table. Photoelectric  Protection
Device can protect the machine and worker. All the function can be Controled on the electric
Cabinet.
    If you want to Cut Thicker Plates, We Advice you to choose the guillotine(brake) Shearing
Machine. 

Main Technical Parameters

Machine Photos