40W 3020 CO2 Laser Engraving Machine Ruida controller DSP

Generally the model A use Lihuiyu mother board and laserdraw/coredraw software  while model B use  LaserCAD/AUTOCAD/RUIDA and RDworks engraving software. It makes DSP technology and USB flash disk read and edit file.

Feature:

1.128M internal memory makes it can separate from PC and independently set parameters. Good optocoupler make it insulate from external electromagnetic interference and let it has stable and reliable engraving.

2. It only externally connected with different motor drive to control stepper motor or servo motor.

3. It also has automatic blowing,auto focus,pedal switch and security protection function. Also soft/hard coordinate limit protection is applied.

4. It has stable high speed cutting and soft velocity variations performance which realizes no sawtooth shape during high speed cutting.

5. Network management make it communicate with PC easy, security and relible.

6. It has outage continued carving, power failure recovery, processing time prediction, intelligent typesetting and cost budget function.

7. 4.3 inch color display screen makes operation easy and f riendly man-machine interface.

8.Small circle cutting speed can be flexibly set and improve small circle cutting effect.

9. Gallery has 2000 documents, laser anti-counterfeit fingerprints and thousands of fronts.

10.Hierarchy data output function is applied. Output power, output speed,laser mode(engraving,cutting or slope engraving at tach hierarchy and these data can be saved automatically.  

11. Real-time status or track of engraving or cutting and lock display function are applied on this machine.  

12. It support USDB 2.0 interface and U flash memory disk read and write file.  It is good for mass engraving or cutting.

13. It supports two laser control function. Each laser power can be adjusted individually. Also two laser head reciprocal cutting is applied at this machine.

Specification:

1.Laser power supply:MYJG-40/50 CO2 power supply

2.Place item area:425x210m

3.Engraving accuracy: 0.8x0.8mm,data,English character

4.Engraving mainboard: DSP digital control panel. It supports AutoCAD, CoreLDRAM CAD,CAM and other graphics processing software.It supports PLT,AI,BMP,DST,DSB,DXF,etc.

5.Max stamp area:195x75mm

6.Weight: 35Kg

7.Machine size:850x500x250mm

8.Laser power:40/50W

9.Voltage:110/220V,50/60Hz

10.Max engraving size:330x20mm

11.Eletric l power consumption:210W

Application materials

Apply on jade,MDF,metal,paper,leather,plastic,rubber,crystal and other non metal material.