Feature:
1.Three in one juice filling Line is used for hot filling production of Tea, juice beverage and other Products. Fruit juice filling equipment set cleaning, filling and sealing as One, design scientific and reasonable, simple operation, is the preferred Production equipment for hot filling drinks.

2.the complete machine adopts the jam bottleneck suspension process design, and adopts the filling valve Lifting, can meet the hot filling technical requirements below 95 degrees. the Filling action is fluent, rapid, high precision, reliable sealing and low Material loss function to avoid the bottle mouth twice pollution. Only the Replacement of the equivalent parts can achieve the conversion between different Bottle.

Using man-machine interface Mianchu control, PLC computer control, frequency converter control advanced Technology, high degree of automation. the main electrical components of the Complete machine are internationally recognized products.

3.Fruit beverage filling machine is suitable for filling production of drink beverage, the whole machine is mainly composed of bottle starwheel, flushing machine, filling machine, temperature control backflow system, cap screwing machine and cap sorter. Fruit beverage filling machine is one of our company's main products, filling mode is gravity hot filling, through temperature control reflow system to keep the filling temperature about 85 degree, the filling process without bacteria breeding, safe guarantee the quality of beverage products. Compared with the clarification of fruit juice beverage, the filling valve valve is much larger, avoid blocking, filling the jichu part of the mixing device, on the one hand, the distribution of the Fruit is uniform, on the other hand, avoid the local heating of the beverage, make the beverage evenly heated.

4.the operation process of Fruit beverage filling machine: the equipment is sent from the air duct to kapingban, the bottle is transferred from bottle to flushing machine. the bottle is transferred to Fruit through kapingban. the bottle is transferred to Fruit by kapingban. after filling, bottle is transferred to cap screwing machine by Screw cap. this completes the whole process of washing, filling and filling.

Fruit beverage filling machine is described as follows:

① the bottle washer mechanism: mainly consists of the bottle, upper disc, guide rail, the clip bottle rotates with the disc, and the filling bottleneck of the plate tensioned open a bottle of is reversed, rinse and dried, and then Flip 180.

② filling mechanism: mainly consists of water tank, filling valve, guide rail, bottle lifting device. the kapingban is sent to the Fruit by the kapingban, filling the kapingban, rotating with the water tank, and sliding upward on the guide rod by the guide rail. after filling, the decline is lowered and the filling valve is closed. the bottle is delivered with kapingban.

③ cover mechanism: the cover mechanism is composed of fengaiqi and cap screwing machine and cap sorter. Cap sorter is divided into putonggai and sports cover, the equipment can be compatible to complete the cover of two gaixing, bottle is sent by kapingban, and the bottle is delivered by kapingban after Screw cap.

( 4 ) the reflux mechanism: the finished water from the filling valve, flows to the return tank, and then Draw the heating device through the plastic pump of the return tank, heating to the required temperature, and then flow to the filling vat. There is a certain negative pressure in the return tank to facilitate the backflow of liquid in the filling valve.