EFP To Fiber Converter includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the camera to the Base Station and a return video (3G/HD-SDI or CVBS), Remote control data, genlock, intercom, tally, audio and 10/100M Ethernet are also provided. The system puts all of the signals needed for multi-camera 3G/HD-SDI production onto a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
-
Handle all Pathological patterns
-
Automatic cable equalization to ensure signal integrity
-
3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M
-
10+Km on single mode fiber or 300m on multimode fiber transmission
-
Mic inputs with mute and pre-amps ,With amplifier for phones
-
RS422 /RS232/RS485 remote control
-
Tally/GPI output +12V or dry Contact Closure optional
-
V-mount or A-mount battery optional
Specifications:
General index
Work Temp
|
-25°C to 55°C
|
Storage Temp
|
-40°C to 85°C
|
humidity
|
0 ~ 95% (non-condensing)
|
Camera Optic Adaptor
|
Input power
|
DC 12~19V
|
Power consumption
|
10W
|
Net weight
|
1kg
|
Appearance size
|
160mm*100mm*44mm(without V-mount / A-mount)
|
Optic Base Station
|
Input power
|
AC90~240V
|
Power consumption
|
10W
|
Net weight
|
3kg
|
Appearance size
|
19" 1U standard rack mount
|
Optical:
Wavelength
|
1310nm / 1550nm / CWDM
|
Output Power
|
-6~-1dBm
|
Rx sensitivity
|
<-18dBm
|
Transmission Distance
|
SM fiber 10+km , MM fiber 300m
|
Optical connector
|
Dul LC /FC/ST/SC/MX/ Lemo / Neutrik (optional)
|
SDI input/output:
Signal format
|
SMPTE 424M, SMPTE 292M, SMPTE 259M
|
Data rate
|
270Mbit/s - 1.48Gbit/s - 3Gbit/s
|
Cable Equalization
|
Automatic cable EQ (Belden 1694A cable)
250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
|
SDI interface
|
BNC 75 Ohm
|
Intercom:
Camera Optic Adaptor
|
Interface
|
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack
|
Microphone
|
Mic inputs with mute and pre-amps
|
Headphone
|
with volume up or down
|
Optic Base Station
|
Interface
|
Input:3pin XLR Female , Output: 3pin XLR Male or 5pin XLR
or 3.5mm headset jack
|
Audio
|
Balance or unbalance line level
|
Tally:
Camera Optic Adaptor
|
Interface
|
4pin air head or 3pin mini XLR
|
Output
|
Dry Contact Closure or wet +12V
|
On: short or +12V
Off: open or 0V
|
Optic Base Station
|
Interface
|
DB9(Male)
|
Input
|
Dry Contact Closure or wet
|
On: short to GND or TTL low Off: open or TTL high
|
Remote:
Camera Optic Adaptor
|
Interface
|
8pin air head or 8pin sony's remote interface
|
Data
|
RS422 /RS232/RS485
|
Optic Base Station
|
Interface
|
DB9(Male) or 8pin sony's remote interface
|
Data
|
RS422 /RS232/RS485
|
Ethernet:
Work mode
|
Full duplex/half duplex
|
Data Rate
|
10/100Mbps(AUTO)
|
connection terminal
|
RJ45
|
EFP To Fiber Customization examples
EFP To Fiber Converter Customization examples
Panel diagram:
|