Usage: | Abrasion Tester |
---|---|
Power: | Electronic |
Quick Details
Specifications
UNIVER CCA-1000 Series Optical Cable Abrasion Testing Machine is specially used to determine the ability of an optical fibre cable sheath/markings to resist abrasion.
Securely attach the cable sample, measuring approximately 750 mm in length, to the supporting plate by means of cable clamps. the abrading edge shall be loaded with the mass necessary to provide the force stated in the detail specification whilst avoiding shock on the cable.
Securely attach the cable sample, measuring approximately 750 mm in length, to the supporting plate by means of cable clamps. the abrading edge shall be loaded with the mass necessary to provide the force stated in the detail specification whilst avoiding shock on the cable.
Abrading Stroke for sheath |
mm |
10 |
Abrading Stroke for markings (method1) |
mm |
40 |
Abrading Stroke for markings (method2) |
mm |
100 |
Abrading Cycles |
times |
1~9999 |
Abrading Frequency |
Cycle/Min |
55±5 |
Diameter of steel needle (method1) |
mm |
1 |
Mass of weights |
N |
Bracket 5N*2, Mass 5N*2, Mass 10N*2 |
Mass of counterweight |
N |
5N×2,10N×2 |
Dimensions (L*W*H) |
| |
Working Frame |
mm |
500*420*1300 |
Power |
|
1-phase 220Vac±10%, 50Hz, 0.8kW. |