Usage: | Tensile Testing Machine |
---|---|
Power: | Electronic |
Quick Details
Specifications
in tensile test, the cable is wound in the machine over appropriately sized sheaves. the cable is pulled at a specified rate until a pre-determined tension is applied. the cable is laid to rest under tension as per detail specifications, and then the attenuation and fiber length are measured.
Load Capacity |
kN |
2 (Others upon Request) |
Accuracy Class |
ISO 7500-1 |
±0.5% |
Crosshead Travel |
mm |
1000 |
|
|
|
Loading speed |
Mm/min |
0.2-500 |
Moveable sheave |
mm |
Dia.250 |
Deformation Measuring accuracy |
% |
±0.5% |
Displacement Measuring accuracy |
% |
±0.3% |
OptionalLVDT Type extensometer |
|
Gauge length:1000mm Measuring resolution is Better than 10μm Accuracy is better than ±0.5%. |
General Specifications Load Measurement Accuracy: ±0.5% of reading to 1/100 of Load weighing system capacity meets or exceeds the requirements of the Following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721. Strain Measurement Accuracy: ±0.5% of reading to 1/50 of Full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4. Speed Accuracy: Set speed<0.05% Max. Speed: ±1% Set Speed≥0.05% Max. Speed:±0.5% Position measurement Accuracy: ±0.01% of reading or 0.0001 Mm, whichever is greater Power supply: Standard optional voltages 220/240VAC, 50-60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage. Humidity Range: 10% to 90% non-condensing, Storage Temperature: -40 to +66°C (-40 to +150°F) |