| Rated Voltage: | 10kv-220kv |
|---|---|
| Application: | High Voltage |
| Material: | Composite Polymer |
| Type: | Insulator |
| Brand Name: | BEINENG |
| Place of Origin: | China (Mainland) |
| Safety Standards: | Other |
| Breaking Capacity: | Low |
| Usage: | High Voltage |
Quick Details
Specifications
Crossbar Composite Insulator Overview:
the composite crossbar insulator can effectively use the narrow corridor to open the power transmission, apply to the city network technological transformation, can reduce the tower height, can save a lot of manpower, material and financial resources, because of its high bending strength, Prone to the cascade break accident, porcelain cross can not replace the product; small size, light weight, shock, shock resistance, without manual cleaning, to provide a safe operation to provide protection. Can effectively use the narrow corridor open power transmission, suitable for urban network technology transformation, can reduce the height of the tower, can save a lot of manpower, material and financial resources, because of its high bending strength, to prevent the porcelain cross arrester prone to the level Even the broken accident, porcelain cross can not replace the product; small size, light weight, shock, impact resistance, without manual cleaning, to provide a safe operation to provide protection.
Cross-Fu composite insulator features:
Products using a special steel made of gold, multi-layer protection, sealing performance, to solve the insulator the most critical issue ---- interface electrical breakdown. the connection of the gold and the mandrel uses the shaft constant pressure crimping process and is equipped with the automatic acoustic flaw detection detection system, which ensures the reliability and stability of the connection of the gold and the mandrel. Mandrel and silicone rubber interface with a special coupling agent. Umbrella with a high temperature and pressure under the one-time overall molding process, with the computer monitoring of the two-stage curing process to extend the product life
: Cross the composite insulator production process:
Using injection and molding two production processes, mandrel and sheath bonding seamless, good insulation properties, to avoid the phenomenon of interfacial breakdown.
Cross the composite insulator operating conditions:
Ambient temperature is not higher than +50 ℃, not less than -40 ℃;
Altitude does not exceed 3000m;
Power frequency does not exceed 100Hz;
Applicable to all kinds of dirty areas, especially for heavy pollution areas.
Installation of the cross insulator insulator Note:
(1) insulators should be lightly, light to avoid with iron pieces, tools and other sharp objects friction collision.
(2) When the product is lifted, the knot is to be hit on the end attachment. It is strictly forbidden to hit the umbrella group or jacket. When the rope must touch the umbrella group and the sheath part, it should be wrapped in soft cloth in the contact part.
(3) is prohibited foot insulator umbrella group.
(4) shall not be composite insulators as a line of auxiliary tools, so as not to be subject to impact or bending damage to insulators.
(5) When installing the pressure ring, should pay attention to adjust the pressure ring and the axis of vertical installation, for the open type pressure ring, should pay attention to the same direction at both ends of the opening, is conducive to discharge and protection umbrella group.
D production by data.
the composite crossbar insulator can effectively use the narrow corridor to open the power transmission, apply to the city network technological transformation, can reduce the tower height, can save a lot of manpower, material and financial resources, because of its high bending strength, Prone to the cascade break accident, porcelain cross can not replace the product; small size, light weight, shock, shock resistance, without manual cleaning, to provide a safe operation to provide protection. Can effectively use the narrow corridor open power transmission, suitable for urban network technology transformation, can reduce the height of the tower, can save a lot of manpower, material and financial resources, because of its high bending strength, to prevent the porcelain cross arrester prone to the level Even the broken accident, porcelain cross can not replace the product; small size, light weight, shock, impact resistance, without manual cleaning, to provide a safe operation to provide protection.
Cross-Fu composite insulator features:
Products using a special steel made of gold, multi-layer protection, sealing performance, to solve the insulator the most critical issue ---- interface electrical breakdown. the connection of the gold and the mandrel uses the shaft constant pressure crimping process and is equipped with the automatic acoustic flaw detection detection system, which ensures the reliability and stability of the connection of the gold and the mandrel. Mandrel and silicone rubber interface with a special coupling agent. Umbrella with a high temperature and pressure under the one-time overall molding process, with the computer monitoring of the two-stage curing process to extend the product life
: Cross the composite insulator production process:
Using injection and molding two production processes, mandrel and sheath bonding seamless, good insulation properties, to avoid the phenomenon of interfacial breakdown.
Cross the composite insulator operating conditions:
Ambient temperature is not higher than +50 ℃, not less than -40 ℃;
Altitude does not exceed 3000m;
Power frequency does not exceed 100Hz;
Applicable to all kinds of dirty areas, especially for heavy pollution areas.
Installation of the cross insulator insulator Note:
(1) insulators should be lightly, light to avoid with iron pieces, tools and other sharp objects friction collision.
(2) When the product is lifted, the knot is to be hit on the end attachment. It is strictly forbidden to hit the umbrella group or jacket. When the rope must touch the umbrella group and the sheath part, it should be wrapped in soft cloth in the contact part.
(3) is prohibited foot insulator umbrella group.
(4) shall not be composite insulators as a line of auxiliary tools, so as not to be subject to impact or bending damage to insulators.
(5) When installing the pressure ring, should pay attention to adjust the pressure ring and the axis of vertical installation, for the open type pressure ring, should pay attention to the same direction at both ends of the opening, is conducive to discharge and protection umbrella group.
D production by data.
