Model Number: | 532PD20 |
---|---|
Brand Name: | Elaser |
Place of Origin: | China (Mainland) |
Package Type: | Integrated Package |
Texture: | Copper or Red Copper Housing |
Package: | TO-18 |
Emitting Color: | Green |
PD Feedback Control: | Built-in |
Theoretical Service Life: | 10000 hours |
Quick Details
Specifications
the following example is for you reference.
Features:
Ormal operation at -20degree
Modulating the signal to get a High power output
Small divergence angle
Low Power consumptionandEnergy Saving
Narrowband spectrum---High color purity and strong monochromaticity
Technical details:
O Optical power:20mw, 30mw, 50mw
O Operating voltage: 1.8-2.1V
O Operating current: <300mA
O Wave length: 532nM
O Operating temperature range: -20 to 45°C
O Storage temperature range: -20 to 60°C
Operation method of useage:
the Laser emitted from laser diode shooting at eyes directly must be avoided, which Will hurt the eyes.
the Output power can not be higher than specified parameter. the operating voltage Should be controlled between 1.5V and 2.2V,Otherwise it Will accelerate component aging.
the Output wavelength of laser diode is affected by operating current and heat Dissipation.Good heat dissipation conditions should be Maintained and the temperature of die during operation must be lowered. Assembling the radiator can avoid high temperature rise for laser diode in the Work.the size ofRadiatorWill affect the Start-up time of products.
this product is an electrostatic sensitive device which Firstly requires human body electrostatic discharge when you install or operate It. You canWear anti-static bracelet to Prevent static electricity.
Laser Diode needs a suitable driving electrical source.Instantaneous Reverse current can not exceed25uA andReverse Voltage should not exceed3V,Otherwise the devices will be damaged.
Please Pay attention to the polarity and direction of pins to avoid damage when you Use it.
the Operating environment should be kept away from wet, dust and static Electricity. If the product is not used for a long time, it is recommended to Put it in the nitrogen cabinet, which canPrevent Oxidation and extend the service life.
Package:
100 pieces/plastic tray and a carton for External packing