Hydraulic control line

 

MEILONG TUBE provides either welded or seamless hydraulic control lines for subsurface applications. Hydraulic control line is available in five materials, varying wall thicknesses, and a wide range of working pressure ratings. The line is supplied on spools to exact length requirements. upon request, it is pressure tested hydraulically, purged with clean oil, and sealed on both ends prior to shipping.

 

Welded hydraulic control line is sunk-drawn to ASTM specification A-269 and is available in any length. Seamless hydraulic control line is available in length to 500 ft (152 m). Lengths greater than 500 ft (152 m) are joined by orbital welding, which also meets ASTM specification A-269.

 

Material types for hydraulic control line include TP316L stainless steel, Incoloy 825, and Inconel 625. Control line made of TP316L stainless steel is suitable for sweet to moderately corrosive environment. Incoloy 825 and Inconel 625 are suitable for severely corrosive environments and high-working pressures and temperatures. Control system fluids must be compatible with the environments and operating temperature of the control line.

 

Control line encapsulation also is available, where requested, to provide additional crush and abrasion resistance during installation. the encapsulation material should be matched for compatibility with well fluids and temperature requirements.

 

Dimensional range

Seam-welded tubing
OD		WT
inch	mm	inch	mm
1/8	3.18	0.020	0.51
1/8	3.18	0.028	0.71
1/8	3.18	0.035	0.89
3/16	4.76	0.020	0.51
3/16	4.76	0.028	0.71
3/16	4.76	0.035	0.89
3/16	4.76	0.049	1.24
1/4	6.35	0.020	0.51
1/4	6.35	0.028	0.71
1/4	6.35	0.035	0.89
1/4	6.35	0.049	1.24
1/4	6.35	0.065	1.65
1/4	6.35	0.083	2.11
5/16	7.94	0.020	0.51
5/16	7.94	0.028	0.71
5/16	7.94	0.035	0.89
5/16	7.94	0.049	1.24
5/16	7.94	0.065	1.65
5/16	7.94	0.083	2.11
3/8	9.53	0.020	0.51
3/8	9.53	0.028	0.71
3/8	9.53	0.035	0.89
3/8	9.53	0.049	1.24
3/8	9.53	0.065	1.65
3/8	9.53	0.083	2.11
1/2	12.7	0.020	0.51
1/2	12.7	0.028	0.71
1/2	12.7	0.035	0.89
1/2	12.7	0.049	1.24
1/2	12.7	0.065	1.65
1/2	12.7	0.083	2.11

 

Production standard

ASTM A269 for 316L

ASTM A789 for duplex 2205, super duplex 2507

ASTM B704 for alloy 625, alloy 825

EN10216-5

 

Delivery condition

Bright annealed at control atmosphere

 

Quality assurance

Eddy current testing

Ultrasonic testing

Hydrostatic testing

Chemical composition analysis

Mechanical properties testing

Flattening

Flaring