Full Automatic High Speed Contact Bank Card Milling and Chip Implanting Machine ( SICMP-03)
SICMP-03 is an all-in-one machine perfect for contact card production, it is able to do card milling, glue tape lamination, module embedding. Perfect for small scale mass production
Perfect for a wide range of smart card prodcution needs where speed, flexibility and high efficiency are required.

Smart Card cavity milling machine and module embedding machine

 

Dimension	L 3620mm X W 960mm X H1750mm
Weight	2100KG
Power	AC380V,50Hz ( Depends on country )
Rated power	8KW
Air Pressure	6KG/CM2
Air consumption	180l/min
Control type	PLC+Servo motor system
Production speed	3200pcs/Hour

It's full auto load cards for cavity milling, air vacuum dedusting, chip punching and implanting, hot laminatin, cold lamination, finished chip card testing.
1. Integrating with card milling, module testing, laminating, and module implanting.
2. Specialized fixture design for card centering system, protecting the milling depth from the influences of the card thickness and dimension.
3. Including six standard module milling programs fitting to different requirements with parameters modification conveniently.
4. X and Y the two separated milling stations can mill different profiles at the same time, or individually. It settles the difficult problem of adjusting the center place on two stations while milling
5. Z-Axis moving is realized through guide and ball screw driven by high precision servomotor, to provide the accurate milling depth. Special tool changing program make tool changing is fast and convenient.
6. Depth detection device ensures the eligible rate during milling by rejecting faulty cards.
7. Film loading is controlled by serve motor with sensor detection. Faulty module can be distinguished automatically.
8. Special design and 3 hot press & 1 cold press make better lamination effort, switch mold on touch screen that saving labor cost and time
9. Servo motor working with high precision guider and lead screw makes module transfer more stable and reliable. Module transfer position can be changed easily.
10. Special design for hot press station makes sure module sticking to plastic card tightly. It is convenient to change the hot pressers.
11. Cards transferred through belt driven by servomotor ensure the safety and stability of the machine.
12. Personalized software design. Machine can be empty automatically and sample cards freely.
13. ATR test system is used to monitor production. 
14. Special feeding design avoids unloading double cards caused by static electricity.