Technology Data:

Model	unit	SNL-200	SNL-300	SNL-400
Width max	mm	200	300	400
Thickness	mm	0.1-0.6	0.1-0.6	0.1-0.6
Section roller diameter Section roller quantity	mm pcs	Φ20 Up9/down10
Straightening Method		4point fine micro adjustment
Straighten Speed	m/min	0-16
Motor	HP	1	2	2

 Features:

1.  this is a special designed straightener for the materials that need high precision punching treatment. as we

All know, coil  material fails in the key functions without the flattening and stress relieving treatments. 

2.  the flattening and the straightening secondary wheels adopt the imported SUJ2, milling after HRC60 degree,

Heatreatment and starts production after plating the hard chrome to ensure the evenness of the chrome layers

and the form tolerances of each bearing.

 
3.  the flattening adjusting adopts the floating four-point balancing equipment, with  the dial indicator, which can find the leveling point rapidly.

4.  Each straightening wheel of the S series precision straightener adopts the flatting satellite to prevent the

Distortion in the manufacturing process from happening, which improved the products flatness quality.

5.  with the fixed bottom secondary roller, enhanced the bottom wheel rigidity and  prevent it distorts. 

6.  Upper secondary roller adopts the floating style and obtains different pressures  according to the

Requirement to strengthen the life of the straightening wheel  and improve the surface flatness requirement of

the panel.

7.  the transmission wheel adopts the compelled cycling immersion oil lubrication  to reduce the wheel

Abrasion and be able to work under the high temperature condition for a long time.

8.  Adopts the synchronous transmission structure to transfer each leveling roller individually to lower the panel

Surface flatness improving requirement because of the inter spaces caused by wheels rotating.

9.  the additional lubricating system prolonged the machine life span and enables  it to work under the stable

Condition in long time.  

10.  Due to the differences of the material quality, width and thickness, there are  no fixed values as the

Preferences; therefore, taking some materials for pilot  run before the mass production and start the continuous

Assembly after it reaches the standard.